Mistaken to key in number in closing the safe. .its automatic reset, key lost. .is there any default number to open the safe.
SOURCE: Lost key operator code for Sharp Copier AR-M207.
The default is 00000
Simulation 22 - 07 will display the Key operator code.
Perform the following procedure to enter the simulation mode.
"#" key -> “*“ (star) key -> "C" key -> “*“ (star) key (do this in quick sequence order, the display should change, then enter below)
Main code {22} ->
(Green Copy Button) Start key ->
Sub code {07} ->
(Green Copy Button)Start key
Press the "CA" button to go back to Copy mode.
SOURCE: unable to open digital safe
I have a similar problem as I have acquired (last night) a similar Woolies safe, locked, batteries dead & keys do not work. I am told you may be able to reset the code if you can depress the red button on the back of the door from the back of the safe through one of the bolt holes, easier said than done! Needs a stiff piece of wire or thin steel... good luck I will try this technique soon. These instructions were found by surfing the Net...
SOURCE: Batteries are dead and I've lost the keys. Its an
Only through a licensed locksmith. Provide the key numbers and possibly even take the safe to him/her as proof of ownership. Locksmiths have to record all attemots to open safe's or maling f keysto the police.
Please provide a rating for my help++++Thanks for using FIXYA
Testimonial: "Cheers! Relieved I can at least have it opened without damaging the thing."
SOURCE: Detroit electronic digital safe lost code and keys
Help, just boughta Detroit digital safe, code number to open my instructions are locked inside.
SOURCE: I LOST THE MANUAL, HOW TO RESET THE NEW NUMBER?
I LOST THE MANUAL FOR THE 'HARDLINE' DIGITAL ELECTRONIC SAFE. HOW TO RESET A NEW NUMBER?
2,416 views
Usually answered in minutes!
×