What does TR stand for on a watch - Watches

Watch controls (eve mon crois) TL= top left button TR= top right button BL= bottom left button BR= bottom right button TL= toggle light TR= view date BR= view alarm time BL= toggle options 1 press --> stopwatch 2 press --> change alarm time 3 press --> change digital time 4 press --> return to regular view (When on option) Stopwatch: TR= stop/start stopwatch BR= reset stopwatch time BL= next option Change alarm time: TR= +1 to selected (flashing) unit BR= change selected (flashing) unit BL= next option Change digital time: TR= +1 to selected (flashing) unit BR= change selected (flashing) unit BL= next option Normal view: (controls shown at top) In normal view when: TR is held down --> BR= toggle alarm on/off TL is held down --> BL= toggle through days BR is held down --> TR= toggle alarm on/off (for accurate digital time go to the option of change digital time and set it to the next minute from when you are make sure that the the counting seconds are flashing. When the next minute comes press TR this will reset the seconds to '00' without changing the minute and you will now be accurate to the clock you used by less than a second) I got this info through a long time of just experimenting with the buttons, still working on finding a way of changing the date but for now this should be enough to get you by with the watch. Hope this helps somebody :)

I just got a M.Z. Berger AW206 366 so the setup should be identical.
The watch has four buttons total. I'll name then by their positions. Top Left (TL), Top Right (TR), Bottom Left (BL), and Bottom Right (BR).
(BL) is your mode switch. Press it once at a time to toggle between modes, (Time, Chronograph, and Alarm). From the Time mode press (BL) three times. This will put you back in time mode with the seconds flashing. Press (TR) to toggle seconds back to '00'. Press (BR) to toggle to the next setting point, and (TR) to advance it. Just keep pressing (BR) until all the settings points are the way you want them. Note: In time setting mode it only advances the setting forward when you press (TR). So when using it to change hours display for 12/24 hour display or daylight savings time you just have to keep advancing the hour until it shows up correct. There is no DST or 12/24 display toggle on this watch. You just have to change the hours display manually. To exit time setting just press (BL) once.

Based on this other post, it means Timer.

I'm pretty sure TR stands for timer, but I'm not sure what SP stands for......

I think it means Timer. the descending one! good luck

unfortunately there is no online access to KADIO. One thing is for sure: M stands for MODE; S stands for SETTINGS; D probably stands for DAY/DATE. To set the watch first you have to push the S, then choose the M and then goes the rest. I can't give exact directions, as this is Chinese made watch and no details can be obtained.

The EL in Auto EL stands for Electroluminescence and is basically a fancy way to say backlight.

The website above www.adidas.com/campaigns/watches_fw07/content/index.asp? is the only place I have found to find instruction manuals from adidas

Not too difficult. Press BL (bottom left) to go to TIMR. Then TR to confirm. Then TL and hold until it "confirms". Then in "Seg 1" press BR to move to minutes. Press TR to adjust to 10 Press TF to accept Press BR to move to Seg 2 Press TL and hold until it confirms. Press BR to move to minutes. Press TR to change to 1 Press TF to confirm. You can set up more segments like this.

Use top right (tr) button to select 'Settings'. Then press bottom left (bl), then bottom right (br) to select time setting. Bottom left adjust the time, when you are finished press top left to set. Other thigs such as alarms etc can be set in a similar way.

hold down the lap/rst button for a couple of secs
the secs will then begin to flash and you are in setup mode
press mode to scroll thru the selections