Buck In-Sink-Erator BADGER 5XP BADGERVEXP Garbage Disposal Garbage Disposal - Bl Logo
A
Anonymous Posted on May 16, 2016

My garbage disposal is not working. it "hums", but doesn't grind, and water drains slowly. there is nothing stuck in it.

My garbage disposal turns on but doesn't grind. i followed the trouble-shooting directions to use the wrenchette (their term, not mine), but i can't move the wrench at all - it's too tight. i'm afraid to force it.

1 Answer

Jerry Kramer

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,933 Answers
  • Posted on May 16, 2016
Jerry Kramer
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Feb 10, 2011
Answers
3933
Questions
1
Helped
882425
Points
12076

You are going to have to try to push it through the stuck point. It is clogged without a doubt. Could be a piece of silverware in there. Use a flashlight and take a look down in the hole. Do not stick your hand in there but you can use a pliers or something to dislodge it.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Garbage disposal makes loud noise, nothing stuck, blades turn freely

Bearings in the motor are worn enough to allow the grinder plate to rub against the side of the chamber.
1helpful
1answer

Badger 1/2 HP garbage disposal not working. Motor hums, blades are not rotating. I can rotate the service wrench with tension.

I would keep working the impeller back and forth with wrench while running hot water thru disposal until it turns freely. You can see if there are any small bone fragments or other debris in grinding chamber and removing with long needle nose pliers. Good luck. Thank you.
0helpful
1answer

My bager 5 seems locked up when you hit the switch it hums how do I get it unlocked.

One day years ago, our new garbage disposal got stuck, and started humming instead of grinding. My mom turned off the switch, then she grabbed a wood-handled broom and stuck it down in the disposal. I was wondering, what's that lady doing.

She took the wood handled broom and placed it on the disposal cutter wheel that was stuck. Then she wedged the broom against the sink opening, She pushed the cutter wheel forward until it was free. Then she showed me that the cutter wheel is supposed to spin freely even when the switch is off.

That's how I learned to un-stick a garbage disposal.
3helpful
1answer

My garbage disposal only hums when turned on>>>>>

There could be 2 things that I can think of wrong with it...first, something is stuck in it keeping it from turning...or second the grinders have rusted off and nothing is grinding the waste up.
0helpful
1answer

My garbage disposal runs but turns VERY slowly, nothing is stuck, it just turns slow and steady.

Hi,

The motor has gone bad or got water in it...
Here is a tip that I wrote that will help you to figure out what is going on with your garbage disposal and why it is not working.

Garbage Disposal Clogged or Jammed


heatman101

1helpful
2answers

Garbage disposal spouting water after turned off

Hello, turn on the disposal without water and pour hot water into disposal. Be careful not to let it splash back on you! If this doesn't help you have to remove the drain and drain trap and clean them out. If you need more help let me know. Good luck.
0helpful
1answer

New Garbage disposal, washing machine and dishwasher won't work.

Does not sound like these problems are directly related to the disposer. Grinding sound is most likely the impeller on the washer's pump. The washer gets to the first pump out and is unable to pump due to bad impeller or an obstruction. Bad impeller means replace pump motor. (not very hard) Check water supply to dishwasher. Valve turned off or line kinked? Filter screen at solonoid valve plugged?
Not finding what you are looking for?

847 views

Ask a Question

Usually answered in minutes!

Top Buck Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Buck Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...