At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: IBM x3400 Server power off after half an hour(?)?
I would check all fans first to see if it is overheating. If you open the side case there should be some diagnostic leds you can refer to regarding which components are working or not working.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power supply isn't getting a good power signal from the motherboard. Sometimes unplugging the 20 pin connector and plugging it back in a few times will clean a faulty connection. Otherwise your power supply is at fault.
Hi, This is a Planner issue (Mother Board) . Open side cover and investigate capacitor status . Probably some capacitors are bulged . Check it and replace if necessary . Good Luck
You can install Windows 2003 using IBM Service Guide CD. Its an image file (.iso) . Burn it after download . Then boot from cd and follow the simple wizard . Find the link below
Hi
Welcome to fixya
Sounds like the Power cage has the fault .Probably this case would arise if the power cage gets fault This reason is the server is not getting the proper power to start . Probably this case would arise if the power cage gets fault.
Please replace the power cage and this will solves the problem
The install is fairly easy. Before you begin make sure if you have SCSI adaptors installed have the drivers for them on hand. If you do not have these drivers you should download them to a 1.4MB floppy disk. When you are ready, put the Windows Server disk in the cd/dvd and reboot the IBM. Follow the instructions on screen and you shoud be fine. From start to finish it should take you about 1 1/2 hours to complete everything.
×