Whirlpool Washing Machine Whitemagic h70 Wiring Diagram

The model no is Whirpool whitemagic pro 700H fully automatic top load

White magic h65.while switching on he showed LE now it's showing PE,how it will resolve

I get PE error code in whirlpool white magic F65

Hi Mr. Ashton. We understand you need a wiring diagram for your unit. We do not have those online, be we can email them to you. Please call Whirlpool at 866-698-2538 with your full model, serial number, and email address handy, so we can email you the diagram. I hope this information is helpful. Sincerely, Melaine, Whirlpool Socail Media.

http://www.partselect.com/AdvancedModelSearch.aspx?ModelNum=3SLSR6233MQ0&mfgModelNum=&fkMfgID=3

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

hi i am deepak my whirlpool whitemagic f55 low voltage problem plz help

After a lot of persistent searching, I found a wiring diagram on the internet.

The F1 fault is indicating a problem with the main machine control board assembly. It may be going bad but the only way to know for sure is to do some electrical testing with a volt/ohm meter and the wiring diagram located within the appliance. If possible use the meter and the wiring diagram to check input/output voltages looking for discrepancies between the diagram and the actual meter readings.

TheRepairGuru --- www.repairclinic.com

http://www.repairclinic.com/Whirlpool-Washing-Machine-Parts

go to macspares.co.za
They have couple of diagrams

did you look on the back of the ref, a lot of the magic chefs had the wiring diagram on the back of the ref
if not go to www.whirlpool .com and see if you can locate it there