How can I reset this receiver?

Try >> http://www.fazendomedia.com/pz29913f6-cz1096e20-compatible-hp-4200-4200n-4200l-toner-cartridge-chip-reset-q1338a.html Cheers Greg.

You can try to hard reset iphone(home button and luock button for ten seconds).

If it's factory you can call manufacturer and give them proof of purchase they will help you

Same issue on Mac OSX 10.4.1 with my SP 2720. Just purchased and is in excellent condition, never registered. Double checked all connections, downloaded and re-downloaded updater. Updater continues to say cannot find device. Tried other USB cables, ports, turned on/off, etc... Nothing. Would LOVE to know what resolutions others have found. Please let us know!

This may sound obvious but it needs to be repaired by a jeweler/watch repair shop. Although it is possible that the stop watch second hand is out of sync it would usually mean that the stop watch is starting at 3 seconds before 00:00 for 57 stop. If that's the case you should be able to readjust the start/stop position by pulling the crown out to 1st or 2nd position and then pressing the stop watch start stop buttons. One press, one position. Although I am not certain of the exact sequence.
However if you are unsure or it starts at the 00:00 position you need to find a jeweler you can trust to do the work. Check out a few places and ask to see the credentials of the watch repair person then compare and make an informed decision. Don't just use the jeweler at purchase point.
Most times, if it's a simple repair, like readjusting the hands a good jeweler will do it for nothing.

Good luck

Hi,

For you to resolve this problem, you'll need to reset the router. Press and hold the reset button for 5 seconds, and when you are prompted for the user name and password just input "admin" in both fields.

Try connecting your computer to the router after this process.

Good Luck.

You can go to www.hobartservice.com. select parts and type the machine ML number from the data plate. here are 5 different ML options, otherwise I would have given you the part number.
It will open an exploded view of YOUR machine's build, complete with part numbers.
You can then call your nearest Hobart dealer for a cost and availability. They are still a current model, and for their size, an excellent mixer worth repairing.

Hi Try www.citizenwatch.com for your manual of instructions.
Try Leaving watch in direct strong sunlight or under bright light for at least 12 hours.