KLH Audio Players & Recorders - Recent Questions, Troubleshooting & Support
Program the klh r7000 remote
With the unit disconnected, remove the top cover to reveal the fuse, which is located near the large capacitors, diodes, and power transformer netgear r7000 speeds
supports both 2.4GHz and 5.0GHz wireless frequencies, . I believe the issue with your receiver is more serious than a blown fuse. Check for a short circuit before replacing the fuse. If there is a short circuit, especially in the power amp section (which is frequent to fail), replacing the fuse without testing it may make the situation worse.
1/31/2022 10:38:15 AM •
on Jan 31, 2022
Blown subwoofer fuse..
Well, it should state in the manual what the replacement fuse is.
There might be a fuse holder near the pwr. plug. , Or near the controls for it. If not....
You might have to open up the sub unit ....and find the blown fuse, and remove it to see what you have. Be sure to unplug the unit before opening it up.
Take the fuse to Radio Shack, or your local electronics supplies stores. Replace with the same, or the correct fuse.
Find a fuse retailer
If you can post a picture of the fuse it might help in tracking one down.
However I should point out that fuses rarely blow on their own. And one blown is a sign of a serious overload, probably in the main amp or power supply section.
7/9/2018 7:31:01 PM •
on Jul 09, 2018
Not finding what you are looking for?