Is Wather King model10JA801 a 4 Ton unit? - Weather King 12AJA4801AH Air Conditioner

Question edited for clarity.
Question moved from Firearm Optics.

this link is all Doom and gloom, but the first thing to do is clean the filters.

https://www.abchomeandcommercial.com/blog/blinking-red-light-on-ac-unit/

https://www.google.com/search?q=weather+king+wp1424aj1na+condenser+lights+blinking

..

EPA regulations: Freon 22 units are no longer available, Units that are compatible are available They come pre charged with nitrogen It must be dumped. If there is freon in the old system it should be pumped down into the condenser unit before the inside unit is removed, Close the high side king valve and run the unit until the low pressure reads near O Close the low pressure king valve. and turn unit off. 410A freon units are readily available. Most if not all 2 ton air handlers will work with any outside 2 ton unit though some building codes will not allow a mix. Their reason: if something fails who is to blame:

36 is equal to 36000 btu. To find the ton divide by 12000 btu. 12000 BTU is a ton of refrigeration. This is a 3 ton unit.

it is a 5 ton unit

What's wrong with your current AHU? Any Ruud dealer can assist you. Most 4 ton units work with r-22 or 410a. As a side note, most parts in an air handler can be replaced unless the case is rusted thru.

Hello, This is a 3 1/2 ton unit.

Hello Larry Both units are 10 SEER.Standard rating ,not efficent units.JA25 is a 2 ton unit,JA60 is a 5 ton unit.Thats 24,000 BTU & 60,000 BTU.I hope that helps.

if your indoor unit is 1.5 ton the answer is no
if your indoor unit is 2.0 ton then you can jump to that size.
Note :your duct system may have been designed for a 1.5 ton and may need to be reconfigured for a size increase.
Your hvac contractor should know this?

That is a 13,14 Seer straight Air Condensing unit using R-22 refrigerant.Three ton unit.

This is a 3 ton unit

Hope this helps Ya.