MCI Error from SHOWMCIWND The Device Driver is not Ready

1. Look online for the newest device-driver for your video-card.

2. Purchase a new "high-end" video-card, remove the old video-card, install the new video-card, and load the device-drivers from the CD-ROM that came with the new video-card.

3. Don't try to load the "Modern Warfare 2" software.

Hi, kindly get it downloaded at : www.driverskit.com/MP3/Samsung.html
www.nodevice.com/driver/.../Samsung/MP3_Player.html

Regards, Jay__GT

It might be possible some kinda a BIOS corruption. Let us try this first. ASA computer starts keep on tapping F2, it will enter the BIOS setup utility, then press F9 and then F10, save the seeting and restart the computer. It should resolve the issue. But if the issue still persists, then update the BIOS. Visit the webiste mentioned below:

http://support.acer.com/drivers_download.aspx

Select the model and update the BIOS.

Click on this link: -

http://support.microsoft.com/kb/142731

Microsoft updates probably caused a change in your computer and now a device driver won't work. Use a cardreader to download your pictures.

go back in dubai and return the product

Mark

I also had same problem.

Go to

http://www.musiccoach.com/technical_support/errpages/mciset.htm

and install

http://www.musiccoach.com/technical_support/downloads/indeo32fix.zip

open, unzip, install "setup"

After this you can see all video.

Don't forget to set properties of file "charang guitar coach" : open with right click of mouse, open the tab "compatinbility" and set "compatibility mode to windows 98/ME or windows 95

Good playing guitar

Fausto Viegas

Try moving the modem to another pci slot. If you still get the error message, see if you can get the modem to install in another machine. I would also check to see that you are using the proper driver, and the most recent

hi im josh in cebu phils.may i help you? friend try my solution ; Problem: Your Monitor Works, but Displays an Error Message Before Windows Loads If you see an error message, you at least know that video signals are getting to your monitor. Look for these common messages:
Bad or missing FILENAME In this message, the FILENAME refers to your video card's device driver file. Make sure that the driver has been copied to your hard disk and selected properly within Windows.
NUMBERxx This type of message (such as 24xx) indicates that you have a defective video card or a problem on the motherboard, or that you are trying to display in a mode that your system can't display. Check all the switch settings on your card and motherboard, and if the problem persists, see a repair technician. try to use that, good luck hope i helped you.

Did the message say:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"

Download the Delete driver application from Canon's website and run it. After deleting this and rebooting, try installing again.