20 Most Recent
Questions & Answers
Olympus Underwater MJU 795 LEAKS
I have an olympus 770 sw I used to have the same problem... the solution is after using your camera make sure the camera is dry and open the slot for the battery and clean it and do the same for the other slot somtimes youll get small debree in the cracks of your cameras cover for the battery slot thats were the water enters. I use a little bit of vaseline on the rubber pading for the battery cover to lube it out and had no problems sinse.
I never had a problem
There is no repair on this camera that you can do, you have 2 choices, send it back to Olympus for exchange unit (very costly) or just replace it.
Olympus Stylus 770 SW is not seen when connected
Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com
Why does my olympus camera
I'm guessing that your memory card is an SD type. These cards have a little switch on the card that can write protect or "lock" it. Take the card out of the camera and check this switch. To unlock it, it should be moved towards the edge of the card which has the electrical contacts.
Olympus 770 sw lens cover not closing
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera
which can prevent the full power of the batteries from flowing into the
camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with
a dry cloth (heavy corrosion may require cleaning with a wire brush,
steel wool, or sandpaper). Remove any residue that may have fallen
into the battery compartment during cleaning, then wipe both ends of
the batteries and place them back in the camera. This cleaning clears
the problem about 90% of the time. If it doesn't work for you, chances
are that your batteries need to be replaced because they're just too worn to properly power the camera.
And then, of course, there's the possibility that your camera may have
a problem that requires professional repair.
Not finding what you are looking for?