My sony cybershot dsc-p2000 has a black image on it

The DSC-W610 will not deface your photos by scrawling a string of numbers across them. However the date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

1. Ensure the camera is turned on.
2. If applicable, ensure the lens cover has been removed before taking pictures.
3. Ensure the LCD backlight is turned on by pressing the DISPLAY button several times until the screen appears. NOTE: Depending on the camera model, the DISPLAY button may be labeled as DISP or with a display icon [FIG. 1]. This button could be a standalone button or incorporated as one of the control arrow buttons depending on the model of camera.
   
4. If operating the camera with a battery, ensure the battery is fully charged.
5. Ensure the battery is inserted properly in the camera.
6. If operating the camera with the power adapter, ensure it is plugged into a working AC outlet.
7. Ensure no Audio/Video (A/V) cables are connected for viewing pictures on a TV; the LCD screen will not display when an A/V cable is connected.
8. Perform a reset procedure on the camera.

The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. The Sony Service Web site at http://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer.

---
Try to reset the camera to original settings:
How to reset a Cyber-shot® digital still camera back to original factory settings. Solution
Cyber-shot cameras nowadays have a built-in rechargeable battery for retaining time, date, and other settings. Since the built-in rechargeable battery is not removable, current Cyber-shot camera models can only be returned to the original factory settings by pressing a small RESET button on the camera or by using an Initialize option in the menu.
Older-model Cyber-shot cameras (prior to the year 2000) do not have a built-in rechargeable battery and do not have a RESET button or Initialize option in the menu. These cameras require a manual power reset.
IMPORTANT: To determine whether or not your camera has a RESET button or Initialize option, or for other model-specific information to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are available online in the Manuals/Specs/Warranty section of the Sony® eSupport Web site.
Follow the appropriate procedure below for your camera.
Using an Initialize option in the menu
Since Cyber-shot cameras have different menu system layouts, refer to the instruction manual specific for your camera model.
Using a RESET button

1. Locate the RESET button on the camera.
2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
3. After 2-3 seconds has elapsed, release the RESET button.

Performing a manual power reset

1. Turn off the camera.
2. Remove the battery pack.
3. Remove the button-sized lithium battery.
4. Allow the camera to remain without power for 30 seconds.
5. Reinsert the button-sized lithium battery.
6. Reinsert the battery pack.
7. Turn on the camera.

Hi,
It is problem of lcd screen that will be replaced to get correct picture view.
Local camera repair shop will replace it or if you have expertise then can replace lcd screen by yourself.
Let me know if you need part number of lcd screen for DSC-S930 camera.
Thanks.

if there is no picture at camera mode so in this case camera ccd imager ic is defective so please go to your nearst sony service centre & fix the problum

my sony cybershot dsc-w200 when i click on the camera the image dont exist its just white screen

It is known problem of bad ccd imager in Sony DSC-T1 Cyebershot camera and ccd imager will be replaced.
Sony will repair this camera free of cost for ccd imager problem as per announced scheme. You will be charged $20 for shipment.
Click Sony CCD Imager Support fro details.

Yes, I can help you.
Your camera Sony DSC-T33 Cybershot has problem of CCD Imager and this part needs to be replaced.
Sony will repair it free of cost as per announced scheme. Please click Sony CCD Support for details.
Regards,

http://www.sony-asia.com/support/announcement/58200/product/dsc-t3

Dear Davo Pottso

This has even happen to my camera, i suggest u to ignore this effect. It has been said that in sony cameras a type of Iodine glue is ussed inside which reacts and causes these sort of problems on heating of the camera. My best advice is to keep the camera cool and avoid over heating by continous shots.

This does depent on the software you are using to print the images- The data is in the images the computer programs has to find it. What program do you use to print?