20 Most Recent
Questions & Answers
Well all you have to do is to get one, go to the nearest gadget store where there are digital storage supplies and choose the appropriate memory stick for your camera brand.
on Oct 10, 2013
Take the camera card out of the camera.
This is a factory reset procedure so you will loose any pics in the internal memory!!
Turn the camera off and take the battery out (including AC power). move
the power switch to the ON position and hold down the power button for 15
seconds, then move the power switch to the OFF position and release the
button, put the battery back in and power on the camera.
NOTE: you will have to reset the time and date + any previous user settings.
Hope this helps!!
on Nov 17, 2012
In most Computer/Camera/Digital Stores it will be available or even in big supermarkets.
on Sep 20, 2012
While viewing the picture to be deleted, press the trashcan button between and below the cursor pad and the LCD.
on Jun 25, 2012
You neglected to specify the operating system for which you want the driver. Sony has drivers from some operating systems here
.You don't need a driver in order to download photos from the camera to a computer so you can burn them onto a CD.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa
on Mar 26, 2012
You don't need a driver in order to use your camera.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa
.If you really want a driver, take a look here
to see whether Sony has one for your operating system.
on Mar 26, 2012
Compatible Part Numbers:Sony NP-FC10Sony NP-FC11The high quality, standard Sony Cyber-shot DSC-P9 battery
charger kit includes a DC Desktop charger with US AC wall charger, and car charger (cigarette lighter adaptor) for most vehicles.
on Feb 29, 2012
Sorry but usually when the camera lens is forced shut, the gear mechanism will get out of sync. Usually even if it will open, you will receive a Lens Error
on Jun 25, 2011
MEMORY STICK ALREADY INSERTED, BUT SHOWING NO MEMORY STICK ON THE DIGITAL MONITOR AND FURTHER IT IS NOT WORKING
on Apr 24, 2011
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
these at own risk as it may further damage the camera.
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.
on Feb 06, 2011
The memory stick does not have to be Sony branded to work; it just needs to be the right type. Try searching on Amazon, and you should find alternatives.
It may be worth trying to format the memory stick you have. If it has just become corrupted rather than faulty, a format (in the camera, using the camera's utility) may restore it to usefulness.
on Jan 23, 2011
Haven't I wanted to Throw it out the window before as well. That was a good chuckle but no you don't need to do that, what's happened is that the internal battery the one that keep the day date time and anything else programed into the camera alive while the main power source is shut off.
Replacing an internal battery is covered in the owners and can be done most often by the user/owner. It looks like a watch battery but unlike a watch battery can be replaced without a whole lot of difficulty. I'm unable to find a manual file for your camera but would suggest because of design that the internal battery would be in the same compartment as your main power batteries and memory card it will be under a little door don't forget we are looking for something the size of a watch battery. Hope this helps. Oh and close the window ;-)
on Dec 30, 2010
All reputed company supply User Manual or Instruction Booklet along with their product to make the customer understand how to use the product. Most of the features are explained by illustrations. Make a habit to go threw such book and liturature supplied with the product.
In your case:
Keep the size lowest or VGA when quality of the picture is not very important. To get best resolution you may choose larger size, at the cost of more memory usage and less number of pictures.
- Set the mode selector to Camera position
- Turn on camera and press the Dustbin symbol The Image Size setup item appears
- Select the desired image size with up / down arrow key The image size is set.
After the setting is completed, press
(Image Size). The Image Size setup item
disappears from the screen.
• The image size value selected here is preserved
even when the camera is turned off.
I hope this answer is useful to you and you will like to visit us again for your query.
Thanking you for using Fixya!
on Dec 24, 2010
Not finding what you are looking for?