Why wont my ge dishwasher start with display showing HI

Instead of pushing delay start, hold it in for 3 second. This may reset back to 0.

Hi,
The varioSpeed symbol means the running time is shortened depending on the washing program.

Do you see an error code displayed - Siemens dishwasher error codes inform you that there's a problem with your machine. Please have look here
https://www.siemens-home.bsh-group.in/customer-service/support/problems/dishcare/dishcare-error-codes

Hope this helps.

Best,
Dave, Just Fixed

that's not an error code. it's a 1H, as in one hour, the delayed start function. hold the delay start button down to override, then reset it back to where you want it.

you will need to check the fault code that you get with the beeping.
If the dishwasher has a display then it should show Fxx or Uxx.

If there is no display then find out which lights on the panel are on at the time you get the beeps.

Hi,
Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...

Dishwasher Problems - Waterwill not drain out

heatman101

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems - Water will not drain out

heatman101

Hi,

When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...

Dishwasher Spray Arms not Spinning


heatman101

I am in desparate need of either a GE Jet343G oven with a manufacture date before May of 1989 - or a manual or some documentation that shows this oven was made before than.

I talked with a GE techy, and was told to either turn off the circuit breaker or unscrew the fuse for the power to the dishwasher, wait 45 seconds, then turn the power back on. GUESS WHAT? IT WORKED!!! try it.

You have a bad control pc board.