Graphic problum it is jerking

Try reinstalling the application.

hi swapnil sharma my problum not optimum mode recommended 1600*900 mode60hz

ussualy that means a problum with RAM ...... you can take the ram and clean it and replace.. if nothing happen it maybe the ram is damaged...so change the ram..........
or maybe a problum of a card u have installed...... like graphics card...

if u need more help email me :- aliumarahmed@hotmail,com
[email protected]
[email protected]

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

If your computer came with a motherboard disc the drivers could be on it

Want to make sure your drivers are in place and no errors have occurred? Simply click start right click on my computer select properties then select device manager scroll to Display Adapters and click on the small "+" you should see the model of your PCI Express graphic card there. If there is a problem with it, a yellow exclamation mark should appear besides it. If you don

i thing problum with your graphic drivers. re instal the graphic drivers.

make sure that the UPS is working with 100% voltage. this prob is common and it creats from Voltage problum.\
good luck
shakfy

If the graphics card is bad, the only solution is to replace it. If you want us to analyze your problem on our computer, we will need (1) Name of manufacturer or Computer; (2) Name of the model and number; (3) the ID of the mother board; (4) Tell us in detail what happened with the failure, before the failure, during the failure and afterward. This way we can put together a mathematical module and duplicate your failures. Then we can give you instructions about the repairs that will be fact and not guesses. Thank you for considering our service... My name is Constantin (arzconst which is my nickname with my employer Fixya.com)

Try this link

http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=1065&OSFullName=Windows*+XP+Professional&lang=eng&strOSs=44&submit=Go!

I hope it helps!!!

Hi usafsohail.
It is possible the motherboard has a built in graphics card. When you add the FX card into the system you must disable the onboard graphices card in the bios not to load. Example; If the FX card is an AGP, you must enable the bios to boot the AGP slot first & not the onboard (Intergrated) video card. If you list the model number of the motherboard I can check if this is the case.
If you have you're manual for the motherboard you can check this you're self.

Mike

the problem i was having is that i cant view others webcam even they do invite me