20 Most Recent
Questions & Answers
I have an Advent laptop
remove all video drivers and restart the laptop .try work with generic driver, and check the laptop. after that go to nvidea web site and download the driver and install
Can you be more specific, what is your problem?
I need Windows 2003 server X32 Driver for GF 8600GT 540M 512MB DDR2 TV DVI PCI-card
My cd is been damage
type nvidia drivers in google search
then click on the first link
fill in the correct info of u r graphics card ....
I install nvidia geforce 8400gs.
The model number would be helpful in determining exactly which card you have but, s-video should certainly work and they also make an adaptor that converts s-video to component video if that's something that you want. You will have to, if you haven't already, get into "control panel" and then get into "personalization". There you should see your two monitors. Here you can adjust your resoulution. You will also have to check in "device manager", click on the box(on right) next to "monitors", it should show your 2 monitors. Right click on each, one at a time, and in the dropdownlist you should see "disable" if you see "enable" click on that and exit. If you see any warnings, !, ?, or a yellow triangle, click on thta and follow proceedure. You may also want to click on the box next to "display adaptors" and check for warnings, right click on and make sure it' also says "disable" in list with both monitors connected.
When i boot up,get 1
the beeps are post during
post the very first work is done by the ram,all the memory in the ram is first
transferred to the hard disk,and remains active untill turned off.
that your RAM is securely seated
One bad lead can cause a computer to continue on a cycle or
to shutdown or fail to detect your hard drive
Test all leads that attach to your hard drive including
the leads from your ((motherboard
to your hard drive)) make sure they have a secure connection and are not
faulty or just replace them there probably old and faulty
sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have
secure connections and are not faulty even the electic extensions or just
replace them they could be faulty a computer needs its connections to continue
its cycle and have an end so any faulty leads will end up with a computer error
Hi, When I try and
I would suggest you lower your resolution settings from your video card to your monitor. Possibly they are to high for your monitor to handle. Go into control panel to change your settings at a lower rate and see if it runs any better.
I hope this helps you out if so please leave me some feed back.
Not finding what you are looking for?