Question about Philips 46PP9302 46" Rear Projection Television

1 Answer

Adjusting colors on a magnavox 46" projection TV

How to perform a colour adjustment on a phillips/magnavox 46" projection TV (model # PN2046) dateĀ  November 1992.

Picture colors are faded.

what should I do

Posted by ejilla on

  • 1 more comment 
  • Anonymous Dec 10, 2007

    I'm unable to get the picture completely focused using the focus/color adjustment control panel in rear. Are there other adjustment to be made besides the 6 knobs on the focus panel?

  • arizonadarle May 26, 2008

    I need to know how to open the front of my Magnavox ,1992, 46" projection screen. Model RL 8544AK08, serial# 83612262. I used to have regular service on my set and the tech would open the front of the set and clean the projection mirror and the color lights. This has not been done in the last 4 years and now my picture is is dull. Unfortunately, I can't remember how he got to mirror. Any help would be appreciated.
    Darlene

  • Art Villasan Jun 05, 2008

    The blue color is not aligned in the left bottom corner. The remote control cannot align it. Blue slants upward and left

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace the CRT fluid. It grows algea in the blue and green only. 9.99 from MCM electronics.

Posted on Nov 16, 2007

  • Anonymous Nov 16, 2007

    I have done 2 of these. really easy. I bought another for $35 dollars and now have a big screen in my garage...

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The picture on my phillips rear projection tv is red and I can't change it by adjusting colors. What is wrong and how can I fix it?


Tv have colors lines R,G,B mis alignment any colors,shadows colors, 3D pictures,the tv have a problems known as a convergence problems.The tv convergence board is dead.The 2 STK Convergence ICS and some or all it resistors are dead too.Must replaced these parts to solved convergence problems.The shop will cost $300-350 for parts and labors.

Aug 05, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a 55 inch phillips magnavox t.v. Im almost positive its a projection t.v., my problem is that the picture shows up really dark, you can see when the show is a bright show, but comes up a weird...


I would say your small signal module is bad. This is the board with the convergence ICs. Have a tech or yourself pull the board out and replace the ICs and some resistors. Checkout TVREPAIRKITS.com. They will have your model and its symptoms. Hope to guide you in the right direction!

Apr 29, 2010 | Philips Magnavox 55P9271 55" Rear...

1 Answer

Adjusting the color


replace the coolant in the CRts. You can get the Phillips CRT coolant kit at the following link. The kit contains the coolant and the CD with instructions.
http://servicemanuals.vstore.ca/

Sep 20, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Magnavox 51" 51MP392H seems not to have any reds in picture.


his is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
Also - Dull video problems...
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 12, 2009 | Philips 46PP9302 46" Rear Projection...

1 Answer

Changing oil, in guns RED Green Blue ( algae)


you can get the coolant kit which has the coolant for all three tubes and step by step instructions on how to do the proceedure on the phillips / Magnavox rear projection Tvs.Heres the link shipping is free within the US.
http://servicemanuals.vstore.ca/product_info.php/pName/phillips-crt-coolant-replacement-kit/cName/repair-kits

Apr 22, 2009 | Televison & Video

1 Answer

MAGNAVOX PROJECTION TV- GOOD PICTURE , BUT NO COLOR


you need the ssm panel. You can get a replacement panel for your model at the following link.Which is the correct board for your model it controls color, convergence and etc.
http://servicemanuals.vstore.ca/product_info.php/pName/phillips-ptv900-series-ssm/cName/sale-items

Apr 21, 2009 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Phillips Magnavox 9P6031C103


You can try ebay, they may have them for auction. or you can try the vendor (philips).

I hope this helps

Shuttle83

Jul 07, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Tune up tv


sounds like convergence problems.

Dec 24, 2007 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

RCA 46" Rear Projection TV - Picture is Blurry and RED


That sounds like the screen and focus controls you are adjusting. It sounds like you have a bad HV Splitter inside the TV. #205064 or #204809 Depending on your model number. http://www.matelectronics.com/acatalog/Mat_Electronics_Replacement_Parts___TV_134.html sells them for about 20 bucks.

Dec 27, 2006 | RCA P46812BL 46" Rear Projection...

Not finding what you are looking for?
Philips 46PP9302 46" Rear Projection Television Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...