No pic when ipod plugged in

It should work just fine. The deck plays .mp3 files so it will search your device for such files. Youll be fine

if you are using the av ipod cable that plugs into the usb and the red,white,yellow rcas, you will have change a setting in the audio section for the audio to work, if you go into the AV settings, the first option with say AV1 input, press it until it changes to IPOD. you should then have audio, if that doesn't work, the the rcas are improperly connected to the radio. hope this helps

u need a special plug

it probably unclips from the dash, but you have to slide the player out to put the wire in

buy composite av adapter from apple, make sure its composite and not component adapter

Do you have an ipod module or are you using ibus-to-rca cable to connect your ipod to the D3? In order to control full ipod functions by touch screen you need the ipod module, hence the D3 says ipod control ready not ipod control built in. Let me know so I can pin point the problem.

I think you need an Ipod adapter, for sale on Ebay from $35 to $50. It is a module not just ibus to Ipod cable.

I am having the same problem with my new ipod. However, the 5th gen ipod which i also own plays videos on the unit perfectly. So i am very dissapointed with the new ipod how it doesnt work.

Not sure if that works, but me us know if it does. Everything I have read suggests that it will not work. Apple has blocked any after market products from working like avic-d3. I think what you would also need with that is Apple TV. Let me know

You have to roll back the firmware to 1.0.2 in order to get video its the only thing i have been able to find that works and i have been searching for a long time