The scroll function doesn't work

Are you using a mouse with your laptop?if so,and you replaced battery and still doesn't work,then mouse is bad,usually they last about 3 years,just replaced mine.If not using mouse,go to control panel and find adjustments,it may be turned off.

First - re-seat the harddisk and reboot the computer. If the computer does not boot up then reboot andgo into the BIOS configuration to see if the BIOS detects the hard drive. If itdoesn't detect the hard drive then it could be faulty.Next - to check if the harddrive is faulty, remove the hard drive and insert it into an USB hard drive adapter and connect it to a workingcomputer's USB port. If this computer cannot see itas an USB mass storage device and you cannot open the various folders and fileson this drive, then this confirms the hard drive is faulty.Then the hard drive needsto be replaced in the computer/laptop, Windows installed and the computer orlaptop's device drivers plus your programs etc. to get a functioningcomputer/laptop again.

If you have head set connected to computer the computer speaker will be functioning thorough head set and you will not hear sound from computer. When head set is disconnected the computer speaker will function, just like usual!

every nokia cellphones vibrating functions are usually place in the profile features, when you are on the PROFILE functions scroll it down until you see the vibrating functions. and vibrating functions are now usually use in the silent mode. if you don't find it in your profile functions try scrolling down it in the SETTINGS functions. if all doesn't work it means you will have to be ready with your warranty because some cellphones comes out from the factory with defects.

It prevents the page from being scrolled

Need to enable Scroll function on the notebook.

Scrolling function is not working:

1. The scroll function may stop working if the scrolling feature is disabled in Mouse Properties. To enable the scroll function, follow the steps below.

1. Click Start , Control Panel . Select Classic View from the left side of the Control Panel window.

1. Double-click Mouse in Control Panel, and then select the Device Settings tab in the Mouse Properties window.

1. Click Settings , Virtual Scrolling . Select the boxes labeled Enable vertical scrolling and Enable horizontal scrolling .

1. Click OK to save and exit the Mouse Properties window.

1. After changing these settings, the scroll function on the touchpad will be enabled.

My Vaio model is VGN-FS840 and after I formatted by laptop, my function key is not working, what shall I do to make it run? Can I download the driver? is it available in websites?

you can activate this by
1. going to the control panel on your vista machine, make sure you are in classic view
(2) double click the mouse icon.
(3) From here you will select the "Device Settings" tab,
(4) make sure your Synaptic Pointing device is highlighted and then click the settings button located directly below the "port" column, this will bring up properties for this device.
(5) With all categories in the left hand column collapsed, select "Virtual Scrolling" here is where you will find the box that needs to be checked to enable vertical and/or horizontal scrolling.
(6) make sure the "Enable Vertical Scrolling" box is checked.
(7) don't forget to hit apply!

Here is some great source to solve any kinds of laptop's problem.

» Hp Laptop's Solution
» Compaq Laptop's Solution
» Acer Laptop's Solution
» Dell Laptop's Solution
» Toshiba Laptop's Solution
» Asus Laptop's Solution
» Gateway Laptop's Solution
» IBM Laptop's Solution

Here is some another Great source to download any kinds of laptop Drivers.

» Hp Driver's Download
» Compaq Driver's Download
» Acer Driver's Download
» Dell Driver's Download
» Toshiba Driver's Download
» Asus Driver's Download
» Gateway Driver's Download
» IBM Driver's Download
4s22

2 possible solutions...

Reset the BIOS: Works in most cases

Reseat the keyboard: Sometimes it is possible, that the keyboard connector comes loose and thereby causing a malfunction with some keys or overall fails to work.