Some disks when inserted load slowly and when play is push, get a message...resume is on with a big red circle with slash through it

Push the switch on the remote that switches from VCR to DVD and it should work. murf427

Pull the battery out to reset it. Get a DV tape cleaner to clean out the tape deck.

That should solve both.

Hi,

1. Turn off the printer
2. Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
3. Hold the Power Button, release the Resume Button.
4. Not releasing the Power Button, double click “Resume” and release Both Buttons.
5. Click “Resume” for Four times
6. Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

My computer is an old Compaq Evo. It's around the same age. And I'm running Ubuntu 11.04 just fine. I upgraded from 8.04, to 10, now to 11.04
I have to say 11.04 has amazing drivers, everything seems to work 100% of the time with it now. And it supports more PNP (Plug-n-play) devices
Best part about Ubuntu is, you can upgrade, and down grade based on your likes or dislikes.

you have to pay for the movie

have you check the RCA connections from your vcr to your tv..?

Thank you

1. Turn off the printer ( "Power" button).
2. Open printer cover and hold the button "Resume" (red circle in the triangle) and push and hold Power button.
3. Release button "Resume" and then push button "Resume" 2 times and release both buttons.
4. When printer become ready on the display write "CANON Idle".
5. Now close printer cover and push button "Resume" 4 times.
6. Then push "Power" button 3 times to turn off printer.
All done. The printer is ready to print.

1. Turn off the printer ( "Power" button).
2. Hold the button "Resume" (red circle in the triangle) and push "Power" button.
3. When printer become ready hold the button "Power" and release button "Resume".
4. Push button "Resume" 2 times and then hold "Resume" and release "Power" button.
5. When I hold button "Resume" I push and hold "Power" button and release "Resume".
6. When I hold "Power" button, push button "Resume" 2 times and release both buttons.
7. When printer become ready on the display write "CANON Idle".
8. Push button "Resume" 4 times.
9. Then push "Power" button 3 times to turn off printer.
All done. The printer is ready to print.

1. Turn off the printer ( "Power" button).
2. Open printer cover and hold the button "Resume" (red circle in the triangle) and push and hold Power button.
3. Release button "Resume" and then push button "Resume" 2 times and release both buttons.
4. When printer become ready on the display write "CANON Idle".
5. Now close printer cover and push button "Resume" 4 times.
6. Then push "Power" button 3 times to turn off printer.
All done. The printer is ready to print.

if its not a logic board issue, then its a read head issue. i would try everything else first, and then take the outer case off and physically clean the laser emitter / read head, and look for debris in the track the read head follows from center to edge of the disc.
if anyone else has a better suggestion that is not as invasive, try it first.
good luck
mark