20 Most Recent Canon Pixma MP450 All-In-One InkJet Printer Questions & Answers

The waste absorber is full ,Replace the pads
then if you still get the error,you can reset it by following the directions below.
(reset without replacing pads can cause damage)

1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by pressing <--- or ---> then OK

Canon Pixma... • Answered on Aug 16, 2019

Clean or replace the absorber and reset the printer counter to clear the message.

Canon Pixma... • Answered on May 10, 2019

conon ip 7240 error 5B00 help me

Canon Pixma... • Answered on Feb 01, 2019

Hello PiArne - Am I safe to assume you have the user manual for the printer? If so, am I safe to assume you have looked up the information in the user manual. If you don't have have the manual, you can download it from the Canon Support web page here: https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/mp-series/pixma-mp450?tab=manuals . Check the Troubleshooting pages 100-101 in the manual. If the information in the user manual does not help correct the problem, Contact a Cannon Pixma Printer service representative: 1-800-652-2666; Monday-Friday: 10:00 am to 10:00 pm (Eastern Time zone) Have the following information to provide the custormer service representative: * Product name: PIXMA MP450 * Serial number: written on label at rear of machine * Details of the problem * What you tried to solve the problem, and what happened Best wishes

Canon Pixma... • Answered on Dec 17, 2017

Try this... it worked on my MP450... Turn the printer on and open the lid, it shows the cartridges. Now let the cartridges settle to the left. You can notice that the cartridges run on a metal belt. It might be dirty, mine showed a black stripe on it. Take a cloth, a cleenex will be fine and clean it up. Move the cartridges to the right (force them with your hand) and clean the part of the belt left behind them. Now turn it off, close it up and turn it back on. It should work

Canon Pixma... • Answered on Sep 15, 2017

Which Rule is used for your XML files when you load them in BC2? If you go to the Tools menu -> Options dialog, Rules section, and edit that Rule, is there a path in the External Conversion section? If so, this is the expected path of the helper files. Please double check your install directory (Program Files\Beyond Compare 2\) to see if these files are present. For more help visit cbrtechsolutions

Canon Pixma... • Answered on Nov 04, 2015

I ran a full clean and maintenance on mine and it worked fine for another month but then it started smudging and putting lines over he paper again. I ended up throwing it and buying a new printer as the Guy at the shop said its worn out. After 4 years of heavy duty printing, it wasnt a bad run.

Canon Pixma... • Answered on Oct 03, 2015

Hi! Try this https://www.youtube.com/watch?v=52r8b_986lg Greetings, ADCSFXworks Printing Center

Canon Pixma... • Answered on Apr 07, 2015

Clean or deep clean the black printhead. Go to 'printer properties' then 'maintenance' and click the appropriate button.

Canon Pixma... • Answered on Mar 02, 2015

Not finding what you are looking for?
Canon Pixma MP450 All-In-One InkJet Printer Logo

441 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2345 Answers

Cindy Wells

Level 3 Expert

6259 Answers


Level 3 Expert

1997 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • PIXMA Canon

Most Popular Question

print comes out black printing black red

  • Office Equipment & Supplies