Need to know jumpers for adding 2gb ddr ram if there are any

http://www.gigabyte.com/products/product-page.aspx?pid=2255&dl=1#sp
According to their link, it will only support 2GB ram. 1 gb per slot max.

i have a problem with ASUS P5PE-VM motherboard, with 2 GB DDR 400 (2x1GB, Kingmax) the system (Win XP Pro or Vista) doesn't start. it hangs up in different stages.. what's wrong?

Yes 2 gb is ok.

Well you said you used 256+128 and thats lower than 1gb. So try sticking in one of the stick and run it, see how it is. Then try the other, if both are working fine by themself then try cleaning your board with a nonscrathing cloth (or q-tip).

Lastly, just double check if your motherboard runs that kingston type, the pc2100.

As for your memory goes, os 2k can run up to 4gb of ram.

it's between ddram n sdram connector.

your motherboard uses DDR1 SDRAM PC2100 max. as stated on their website:
http://www.biostar-usa.com/mbdetails.asp?model=u8668+d
you cannont put DDR2, but you can expand up to 2GB

Hope this helps
Alex
www.CAS411.com

Straight from intels web site...
Two 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets Support for DDR 400, DDR 333, and DDR 266 Support for up to 2GB of system memory

Greetings,

The motherboard will read 1GB DDR400 memory per slot only.

Keep us posted and thank you for using our service.
FixYa for all your troubleshooting needs.

You can use only DDR 266Mhz dimms maximum upto 2 GB. i.e. one DIMMS of 266Mhz of 2GB or two of 1GB each. For more details read bellow:


System Memory Features

• The D845GBV board provide the following memory features:
• 
  Two DIMM sockets supporting 2.5 V (only) 184-pin 200/266 MHz Double Data Rate (DDR) SDRAM DIMMs with gold-plated contacts
  Unbuffered non-ECC DIMMs only
  Maximum total system memory: 2 GB; minimum total system memory: 64 MB
  Serial Presence Detect (SPD) DIMMs only
  Suspend to RAM
• 
  CAUTION:
  Do not use ECC DIMMs with the D845GBV board. Using ECC DIMMs could damage the Desktop Board.
  

For more details click here.

Thanks
Iqbal

The board supports upto 4 GB RAM. PC3200 RAM is supported.

1. Reset CMOS settings by CMOS jumper.

2. Try updating BIOS of your motherboard from :

http://support.asus.com/download/download_item.aspx?product=1&model=P5GL-MX

Best of Luck,
rajesh_im