No sound Hello there, I have linked all my speakers in to my ax1 and i get no sound, i get a picture, my speakers are panasonic 1000w which came in a home cinema kit i have tried everything please help, mike

This sounds like you have the device on a wrong sound setting. Check the sound settings. For example Dolby sound needs special settings.

check your tv make sure it is in seround sound and the reciver

i need to know which panasonic you own and does the rest of your system just works.....

What is the problem? For more information, or should you have more questions, please visit my website at audioserviceclinic.com. You may contact me directly through the website. Thank you.

If your Speakers are in good condition, you can try buying a suitable wattage AV receiver with a bluray player of your choice brand ( Yamaha, Onkyo, Harmnkardon, Denon, Sherwood...etc) You can utilise your favorite speakers again.

Is THAT the model number? It surely ISN'T the audio power output.

Anyway, figure out what the model number really is and Google it with "cable" or search eBay plus check the 'include description' box.

This might be one...

http://cgi.ebay.com/6-Toshiba-Yamaha-Panasonic-HT-Speaker-connectors-4-2mm-/220758345589?pt=LH_DefaultDomain_0&hash=item3366390775

What kind of TV do you have?
I have found one of the easiest ways to connect surround system is to connect all your accessories (ie. Wii, Cable Box, VCR, etc) to the TV.

Next find the AUDIO OUT on the TV and connect this to the TV or AUX input on the home theater.

Tune the Home theater to the Input that you connected the TV to. This should play the audio through the home theater for any input you tune the TV to.

Note: make sure to turn the TV volume all the way down otherwise there will be some distortion due to the delay between the TV and the home theater.

Good Luck,
Robert

According to the manual the speaker cables are as follows...

1 Speaker cable (center)

[REEX0858-L (green)]
2 Speaker cables (surround)

[REEX0860E-L (blue)]
[REEX0868E-L (gray)]

2 Speaker cables (surround back)

[REE1488 (brown)]
[REE1489 (tan)]

The only things that makes them unique are the unique molded connectors. Hardly $166 worth. You could buy a 100' roll of 18-gauge speaker wire or lamp cord and 5 molex connectors at Radio Shack for a lot less.

If you took the base unit in I'm sure they could help you find a compatible connector and pins.

I hope I understand you correctly.

As you can probably tell from the very different connector types on the subwoofer and the HTS, they don't match up. That speaker system and this electronics are not meant to be used together.

The SC-BT200 uses passive subwoofer while the SB-WA342 is an active (powered) subwoofer.

http://www.retrevo.com/support/Panasonic-SC-BT200-Home-Theater-Systems-manual/id/23459dj389/t/2/

are you tryng to get digital surround ? you can only get left and right audio or virtual surround sound if there is no optical or coax digital audio input connected from the sources digital output for that selection