At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I don't know how to attach the walking foot to my LS 2125.
I don't know how to attach the walking foot to my LS2125. I bought it seperate and it does not work.I might have bought the wrong kind. I do not know if I have a low shank or how do I find out?
My problem was that would not go on the needle clamp screw. When I tried the needle would not tighten. I solved the problem by finding another screw on my older machine that worked. Thank for info. anyway.My problem was that would not go on the needle clamp screw. When I tried the needle would not tighten. I solved the problem by finding another screw on my older machine that worked. Thank for info. anyway.
You can't post conmments that contain an email address.
Re: I don't know how to attach the walking foot to my LS...
When installing the walking foot, you must make sure that the arm that moves up and down is resting on the needle clamp screw. That arm controls the movement of the foot and that allows it to do its "walking" if it is not resting on the needle clamp then it will not work at all.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you have the darning plate over your feed dogs? Read your manual, to see what the problem is. If, you do not have a manual go to www.brother-usa.com under support and download your manual for free, when you enter your model number-LS2125
you probably purchased the incorrect walking foot for your specific machine. check and make sure if you have a high shank or a low shank....the way to determine if you have a low-shank is to measure the screw from the plate and look at the distance if it is 5/8 then you have a low, any higher about 1in. then you have a high shank, so you would purchase a foot depending on your shank.
how to thread
brother cls2125
My problem was that would not go on the needle clamp screw. When I tried the needle would not tighten. I solved the problem by finding another screw on my older machine that worked. Thank for info. anyway.
×