When I turn on this Xerox xg-71D A bright flash of colors fade over the screen, like a tie dye t-shirt. This is the order of the changing colors.
White, Blue, Green. purple,Black
Then it stays black with no change.
any help would be greatly appreciated.
Yes, I used an old CRT monitor and it works fine, also I Tested another LCD monitor and it worked to. It something wrong with this monitor. not the pc. any ideas?Yes, I used an old CRT monitor and it works fine, also I Tested another LCD monitor and it worked to. It something wrong with this monitor. not the pc. any ideas?
yes, I tryed a CRT, and LCD monitor. It this LCD monitor that is not working. I know It shouldn't be the Inverter. Because it is reciveing power. so could it be the board?, if so anybody know where I can purchase the board?yes, I tryed a CRT, and LCD monitor. It this LCD monitor that is not working. I know It shouldn't be the Inverter. Because it is reciveing power. so could it be the board?, if so anybody know where I can purchase the board?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For this project, we will be making a basic sunburst design on a t-shirt.
First, wash the -shirt in order to remove any possible dirt and prepare it for dye absorption. Tie-dying is best done on damp fabric.
Cover our work area with newspaper to protect it from any spills, and assemble all your tools.
Wear rubber gloves to prepare the dye. Carefully follow the manufacturer's instructions provided on the package.
Our particular fabric dye, Venus, for example, calls for the powder to be dissolved in boiling water to get the best, fastest results possible. So fill the large container with lukewarm water, bring to boil, and pour in the dye, starting with the lightest color if you are using more than one color.
While the water is coming on a boil, lay the t-shirt flat on your work area. Grab the center of the t-shirt with your thumb and index finger, and lift it up. Run your other hand down the cloth, twisting the fabric as you gather it together tightly.
Wrap one rubber band around the gathered t-shirt, right below the spot where you lifted. Then, wrap a few more rubber bands, about one to two inches apart from each other. Feel free to make up your own spacing.
Once you're satisfied with the rubber band placement, immerse the entire t-shirt in the first color dye. Boil the t-shirt for 10 minutes , stirring constantly. Then, stir 4 level tablespoons of salt into the mixture for each gallon of water used. Boil for another 20 minutes, stirring constantly.
Remove the t-shirt and rinse in cold running water. Wring out the garment until water runs almost clear.
For designs requiring more than one color, repeat steps 3 to 8, using colors in order from lightest to darkest.
When you have finished dying the garment, remove rubber bands and lay t-shirt flat on your workspace. Place a towel over the still-damp garment, and iron it flat.
Sorry time for a new monitor you might open it up and look at the capacitors and see if any need to be replaced the bad ones will be domed on top normal is completely flat
Yes, I used an old CRT monitor and it works fine, also I Tested another LCD monitor and it worked to. It something wrong with this monitor. not the pc. any ideas?
yes, I tryed a CRT, and LCD monitor. It this LCD monitor that is not working. I know It shouldn't be the Inverter. Because it is reciveing power. so could it be the board?, if so anybody know where I can purchase the board?
×