Xerox Computers & Internet - Recent Questions, Troubleshooting & Support

1. Reboot the machine: Sometimes a simple reboot can clear up temporary issues. Turn off the machine, wait a few minutes, and then turn it back on.

2. Check the hard drive connections: Make sure all the connections between the hard drive and the machine are secure. If any connections are loose or damaged, reset them or replace them if necessary.

3. Update or reinstall the firmware: Sometimes updating the machine's firmware can resolve communication errors. Check Xerox's website for the latest firmware version for your Workcentre C128 model.

4. Reset the machine to factory settings: If other solutions don't work, you may need to reset the machine to its factory settings. Keep in mind that this will erase all settings and data, so make sure to back up any important.

Try this link: http://download.support.xerox.com/pub/docs/3100MFP/userdocs/any-os/en/User_Guide_Phaser3100MFP_S_ENG.pdf

If the default username and password (admin/1111) are not working on your Xerox 7435 printer, you can try resetting the password to its default settings using the following steps:

Turn on the printer and wait for it to boot up completely.
Press the button with a wrench icon on the printer's control panel to enter the settings menu.
Use the arrow keys to navigate to the "Security" option and press the OK button.
Select the "User Authentication" option and press OK.
Enter the current password, if you remember it. If you don't remember it, leave it blank.
Select the "Reset User Accounts" option and press OK.
Select the "Restore Defaults" option and press OK.
Confirm that you want to restore the default settings by selecting "Yes" and pressing OK.
After you have completed these steps, the printer's password will be reset to the default settings (admin/1111). You should now be able to log in to the printer's settings menu using these credentials.

Hai this is Arun. If your motherboard gets power but the computer not starting then there are two solutions :

1. Unplug the wire that is coming from the power switch to the motherboard & plug it again.
2. If it is still not starting, then remove your CMOS battery and insert it again in the motherboard.

Hope these steps may solve your problem. Thanks.

You need a Service Call Fault Code 10-355: A Hard Overheat Fault has been Detected in the Fuser Assembly. The Heat Roll Overheat Thermistor, the External Heat Roll Overheat Thermistor, and the Inlet Roll Control Thermistor all Indicate an Over Temperate Condition. Aug 13, 2015

Fault Code 10-355: A Hard Overheat Fault has been Detected ...

https://www.support.xerox.com > en-us > article

Fault Code 08-311: Registration Side Shift Motor Fault

https://www.support.xerox.com > en-us > article Aug 13, 2015 - Fault Code 08-311: Registration Side Shift Motor Fault. Article Id: 1088027 ' Published: 08/13/2015. Product support for.

Fuji Xerox DocuCentre SC2020 User Manual Hope this helps.

yellow color missing of my xerox wc 7435 printer

https://www.manualslib.com/manual/845101/Xerox-Phaser-6180mfp.html?page=201&term=117-352&selected=1#manual https://www.manualslib.com/manual/845101/Xerox-Phaser-6180mfp.html?page=370#manual

Try this link: http://wss.support.xerox.com/GTConnect/UnifiedAcceptor/AddWebFramework.Main/site/XeroxProductSupport/product/product_3250/lang/en-US/region/region_US/source/DND/Xlang/en_US/Xcntry/USA/prodID/3250/KBlang/en/#!view-content/ViewContent/View/contentId/x_

Anonymous Dec 09, 2021 RTM yet , read the manual under HDD support, purge unused data. or the HDD is bad, you do know right they shrink size as they fail. (if not dead 100%) as dead is zero MB. let me read the manual to you,what else? why not call for service first, and not make it worse. page 110 see words for FULL, (search) bingo. https://www.manualslib.com/manual/868612...

This fault is coming on my copier 5755 what is the solution

010-321 Fuser nip fail, usually after repair fuser unit, commonly we accidentally spoil the nip sensor.

Try this link: http://www.support.xerox.com/support/workcentre-5735-5740-5745-5755/file-redirect/enus.html?fileLanguage=en&contentId=110561

Here is a link to the User Guide (http://download.support.xerox.com/pub/docs/Phaser_3117/userdocs/any-os/en_GB/Guide.pdf) Chapter 1 shows the meaning of the Control Panel lights. One green light lit sounds like normal operation. You must connect a USB cable to the computer and download/install the printer driver https://www.support.xerox.com/support/phaser-3117/

FixYa Experts: Once you have reached a certain number of answers, then you can Edit and Delete these spam posts too, so they don't victimize unwary users. By my estimate, 4 of your fellow volunteer Experts are currently deleting 2500 spams per day, and it's not keeping up with the flood. Please help us out.

FixYa Experts: Once you have reached a certain number of answers, then you can Edit and Delete these spam posts too, so they don't victimize unwary users. By my estimate, 4 of your fellow volunteer Experts are currently deleting 2500 spams per day, and it's not keeping up with the flood. Please help us out.

FixYa Experts: Once you have reached a certain number of answers, then you can Edit and Delete these spam posts too, so they don't victimize unwary users. By my estimate, 4 of your fellow volunteer Experts are currently deleting 2500 spams per day, and it's not keeping up with the flood. Please help us out.

FixYa Experts : Once you have reached a certain number of answers, then you can Edit and Delete these spam posts too, so they don't victimize unwary users. By my estimate, 4 of your fellow volunteer Experts are currently deleting 2500 spams per day, and it's not keeping up with the flood. Please help us out.

FixYa Experts: -Once you have reached a certain number of answers, then you can Edit and Delete these spam posts too, so they don't victimize unwary users. By my estimate, 4 of your fellow volunteer Experts are currently deleting 2500 spams per day, and it's not keeping up with the flood. Please help us out.