At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Yeah i download the software and i have the lil pic of the cam but when i plug the cam in it says searching for software and there is none and when i try to use my cam on yahoo is says theres no cam found...is there a problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Download the DRIVER SOFTWARE of the make/model from the internet by a search .Now install the software on your PC and then connect the web cam which will be detected and installed.
Your web cam will now work. If not the drivers must be rechecked.
Blinking light means your computer still in process reading your data from memory card. Higher capacity of memory card would make the computer need longer time to read it. Just be patient and don't unplug the USB cable. If you think its too long, then you can unplug the cable data, put off the memory card and open in via card reader so you can download your pictures to PC.
Hai, Jenner
Try connect the webcam to your computer, it wll detect the device, note down the device name it display towards the right bottom of your screen.
Then with this device name, brows google and enter device name + 'driver' in the search field click the search button.
U will be provided with numerous sites where from u can down load the driver for ur device.
good luck
check the usb settings enabled in the bios or the cable inside the laptop.In some case the usb cable inside get fault and it will not detect the web cam.In normal case if you plug any usb device it will detect the usb device then the os will show new hardware found and will allow you to install the software for it,if it doesnt detect you cannot install the driver for it and in the yahoo messenger it give the message
Hi, You need to buy bluetooth for PC or USB cable for mobile-PC!!! And you need PC SUITE for your mobile model. And you will easily transfer data, pictures, music everything!!! good luck! :+)
you do not need software for this or any other camera Windows XP can cope very well on its own.
Plug in the camera. make sure it is switched on and set to upload.
Windows will put up the picture and scan Wizard and ask what you want to do with the images
Take it from there
If you have the camera software loaded on the computer- remove it.
Now plug the camera in and Windows Scanner/amera Wizard should come up.
Go to my computer and see if you have a new removeable media drive come up.
If you have do this.
Gon on line and goto www.konvar.com and download and install PC Inspector.
Run this program and directit the the new drive whil will be the camera. and follow the prompts.
×