Ac adapter for vector veco 10s 300amp jump starter

Good clamps are available from NAPA, Autozone, O'Reilly's, Pep Boys, Car Quest, and other suppliers. Check to see if the existing wire terminates in a crimped lug. If not you need to look at the new clamps to see whether they are designed for attaching directly to the wire strands or if they require the wires to be gathered and crimped into a lug to go under a single screw. Fasteners to clamp large wire under a screw are similar to photo here.

recharges from standard AC
Use an w\extension cord

Go to battery spec.com look up battery jump start then click on vector jump starter battery is a TR9-12A

http://www.baccusglobal.com/bd/manuals/NEW%20MANUALS%20FOR%20WEB/VEC012POB%20MANUAL.pdf This may help

Hi,
No,,
This site does not sell anything...

heatman101

Just clip a battery charger directley to Pos and Neg. Job done.

http://www.baccusglobal.com/bd/manuals/NEW%20MANUALS%20FOR%20WEB/VEC012POB%20MANUAL.pdf If this one isn't the one you need you can go to their site to get the correct one

Radio Shack

http://www.stylefeeder.com/i/6sr4398f/Black-Amp-Decker-5140045-42-Replacement-A-C-Charger