Want to know the pre shared key

You can find it in router configuration page. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings then wireless security then note down the WEP key it is your password to connect wifi. Let me know if you need further assistance. Thanks for using FixYa.

http://register.wireless.utoronto.ca/?page=dlink

try that link. It has the step by step setup instructions.

reset the router. it has a small button on the back. push the button for about 20 seconds. it will completely reset it.

hello, make sure their is network subscription on the router, remove the wep. you can look at the back of the router and see if their is a reset button, reset the router if necessary.

Try to reconfigure your wireless network on your DI-524.

To access the configuration page of your router by Default type in on the address bar 192.168.0.1. On the login page by default the Username is admin and leave the Password blank.

If inside the the configuration page of the router

>Click Home
> Click on WIRELESS located on the left side and you will have the wireless setting of your network
> Change the wireless network name
> Under security choose either WEP or WPA -PSK for this type of router.
> Type in your new network key (also know as Passphrase of Key1).

For WEP use 0 to 9 Number or A to F character and it should be exactly 10 characters.
For WPA-PSK you can use alpha numeric from 0 to 9 and from A to Z. The minimun character would be 8.

> Click on apply
> Click on continue.
Try accessing your wireless network first using your wireless computer. If you are connected to your wireless network try connecting to the Internet.

hey what you can do is you can reset the entire router... by using the reset button on your D-Link router... Or else you can also access the router by using the following IP address in the internet exlorer...

try 192.168.1.1 or 192.168.1.0 & then go to the wep settings & reset the router or change the password for the router...

Hello...the pre-shared key is also known as the network key, and you can find it within your router settings.

Open a web browser, and login to your router by typing http://192.168.0.1 into the address bar.

You are prompted for a username and password. Enter username: admin and leave the password blank, or enter your password if you have set one.

Go to Home >Wireless. You should see your pre-shared key, or network key there.

Hope this helps you, but please come back to Fixya if this does not work or you need further help.

Yes, that is possible since you have a wireless router. Router can share internet connection. Go to this link this will help you setup the wireless connection (secure it if you want)

http://www.portforward.com/english/routers/wireless/Dlink/DI-524/wireless.htm then on the very bottom there is an option how to Configure Windows XP to connect to your wireless network.

I suggest this because it would be better if there is encryption on the network so people wont be able to access your internet for free (unless you give them the security key)

Hi.

You need to cascade the Dlink wireless router to your RV042.

Suppose your RV042 has a default IP Address of 192.168.1.1, and the DLINK IP uses 192.168.0.1. Your Physical connection is from the regular port of the RV042 going to the WAN/Internet Port of the DLink wireless router.

Once you do that, your Dlink router should automatically obtain an IP from the main router. If it did, configure your wireless settings and you should be able to connect via wireless.

This is just one way to cascade your router to another router.
For more information, click here.

hi
just had same prob if you go to dlink site in phillipines there you will find the latest firmware for dlink 524 . i couldnt belive i had to do this as all links to uk site had no pages diplayed .i went first to .singapore site then to australia but the most uptodate firmware i found was on phillipines site

ver2.06b02