Posted by Guest on
Please help! Thanks.
Posted by Jun_Iriola on
if you go to start then run and then type in that box cmd this will take you to DOS. Type in there ipconfig It the default gateway is not the same as the 192.168.0.1 then you have to type into your address bar the new IP address. I hope this solves your problem
Posted on Dec 25, 2007
I have been trying to figure out how to block websites from being accessed by my childs computer via the D-link router. Please explain how i can do so.
Posted by lilymx on
go in the web interfae for your router.. to find it click start then run.. in there type cmd... in the new window type ipconfig... look for the line default gateway will look like 192.168.2.2... type that number in a web browser address bar ... the web interface will be on your screen.. to black a web site go in url filtering add the site address.. save the settings ..
Posted on Jan 22, 2009
how do i upgrade my firmware on my dl-524?
Posted by fotball... on
Go to the following website to download the firmware update for the DL-524. This will save the firmware update to your harddrive:
1. Open the web browser
2. Type in the IP address of the DL-524 router.
3. Type admin in the user name field
4. Type the password you set on this device
5. Click on the Tools tab
6. Click the browse button and locate the firmware file you downloaded and saved to your hard drive.
7. Click the apply button to complete the firmware upgrade.
Posted on Mar 17, 2009
Can you tell me what could be the URL of my DLink DI 524 Wireless router? I want to change the password for the wireless.
Posted by spatanka on
Hi, To enter the webinterface configuration of your D-Link 524, type "192.168.0.1" at the address bar of any browser. UserName is "admin" and password - leave blank. Good luck and kind regards.
Posted on Oct 10, 2007
Hi there, it is possible to configure the DI-524 to work NOT in the default "access point mode" but in the so called "wireless client mode"? (it means to connect a single computer or a small private local network to an ANOTHER access point? Thanks in advance, yacc
Posted by Dr. Dr. on
just had same prob if you go to dlink site in phillipines there you will find the latest firmware for dlink 524 . i couldnt belive i had to do this as all links to uk site had no pages diplayed .i went first to .singapore site then to australia but the most uptodate firmware i found was on phillipines site
Posted on Jan 12, 2009
I am from Chile and I need the driver for my router D-Link model DI-524 please and thanks for your help
Posted by luchom on
You can find donwload here:
follow the instruction.
me this help,
pls do not rate me if my solution not solve the issue and you need more further information. but if is invaluable solution rate me fixya.
Posted on May 21, 2008
My apartment has ethernet access through Netrisen, and I have internet connection when I plug my ethernet cable directly from my laptop into the wall. I initially had to enter a username and password when I first plugged my laptop to the wall, but it hasn't asked for them since. When I plug in the router and run through the set up wizard, I have no internet connection. I've tried both wireless and plugging an ethernet cord from the laptop to the router. The router is set to PPPoE with the username and password, but it just says connecting. Please help. Thanks.
Posted by helpdlink on
-Connect your router to the wall and connect your laptop to the router using a cable.
-Use Internet Explorer and type the following line in the address bar: http://192.168.0.1
-You should see a Username and Password Screen...type admin for the username and leave the password blank, unless of course you did give it a password.
-Next you should see the D-Link setup page with tabs across the top that say Home - Advanced-Tools-Status-Help
-Click on the WAN button on the left side of the screen
-Now you should see the WAN Settings Screen
-Click on "Dynamic IP Address" (You should not use PPPoE)
-Click on the Apply button at the bottom of the screen.
-Now close your browswer and restart your computer.
-You should now be able to access the Internet...through the router cable and wireless
-Let me know if you need more help with any of these steps.
-Good luck...and I hope this helps!!
Posted on Jan 14, 2008
Posted by ken5243 on
The D-Link's configuration IP address is 192.168.0.1
Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
Posted on Jun 03, 2011
i want to access internet through dlink DI-524 wireless router on my mobile. but i do not know the pre shared key.
Posted by rebellorud... on
If you don't know your pre shared key or forgotten it. You need to access the configuration page of your router and create a new network name and a sign a new network key or pre shared key. Create the profile of your SSID/Wireless network connetion under wireless settings.
Posted on Jan 18, 2009
1,171 questions posted
Usually answered in minutes!