On my Samsung Intensity II the vibrate for text messaging will not work, any suggestions?

replace the old model samsung intensity II.

Call your provider.

If your provider doesn't block numbers, what has worked for me in the past is sending a text message along these lines every time you get a text

Error 23: SMS Not Delivered - Sender blocked by intended recipient

They might not believe it the first few times, but it gets the point across and the texts usually stop. As for calls, just let them ring through and never answer them.

When you go to settings and set the ringtone for messages and click for vibrate while message enter ensure to hit save before closing the page. This should ensure the phone vibrates when message enters the phone. Although the only other reason why it won't vibrate is if the ******** is bad but if the phone vibrates when call comes in then this is not the problem just save the settings after it has been set.
Hope this solution has been helpful?

Adjust the volume of the key tones
In Idle mode, press [up /down] and adjust the key tone
volume.

Adjust the vibration intensity on the
touch screen
You can adjust the intensity of the vibration when you
tap the phone screen.
1. In Idle mode, press [up /down].
2. Select Vibration and adjust the intensity of the
vibration.

i would want to thing that signing and encryption are fore only email messages, maybe, you would want to try checking your text message settings, select text message center, select edit on options and check for ''send as'' and select as text.

take care.

hello friend , u just go to your phone profile settings there u have silent profile u just select that simple your vibration works
good luck

Here is what you need to do:
First, make a blank voice recording. It can be 1 second, trust me and do it :)

Second: Go into your menu and go to ringer types for text messages.

Select voice recordings (or reminders) it is the second one on the list.

Select the recording you just made (the blank one).

Make sure you have a vibration selected for the texts.

And there you go! Put the volume on max and have a text sent just to make sure it works and you do not hear anything.

I just did this as a solution for a customer who did not want any noise for the texts, just the vibration. For it to vibrate, it needs to have a ringer selected. Something a tester overlooked, no doubt.

If you have a sound settings option on your phone. You should be able to go to Ringer type. Which should list message, roam ringer & voice call. Select messages and then text message. My sounds, and then select no ring, and now you should have no sound when texting. Let me know if this helps

well try holding pound or thee button by the button by the camera

go into profile and set ur message setting 2 silent and ur ringing tone 2 set anytone./.it wont make noise. reply me