My fax machine is saying cover open when the cover is closed

Check for slack in film between supply and take-up rollers. Manually advance take-up roller to remove slack before closing cover.

your looking for a com journal.. but this machine just says the number you sent it to not the photo of the first page

First of all make sure why cover is not closing .check its locks.for to change roll just see iside the machine i am sure there will bi a printed paper from manufactrer with picture how to change a roll .it will tell u the direction of roll.by following the picture just change it MIAN AKHLAQ

Just check may bi cover is not locked properly .and also check there will bi a sensor having some bad sector .just clean it properly.or replace it MIA AKHLAQ

Call me at 7445084 or 09192467036 and i assist to your problem

check the cover if it has been closed properly, if not check the cover lock and hinges.

You can shut off the answering machine this way....press these buttons...

[ MENU ]

[ # ] [ 7 ] [ 7 ]

[ +] [ - ] { FAX ONLY}

[ SET ]

[ MENU ]

You're done now...the answering machine will not answer. If you want to stop the fax machine from answering...press [Auto Answer] off.

Good luck...and I hope this is helpfull!!

turn off overseas mode

The cover may not be prperly closed. Is it difficult to close? Sometimes the cartridge may not be inserted correctly so that the cover won't close properly.

try to sensor check.. press "menu # 9000 # *(ateris) 815" then remove the ink film.. try to trigger the white lever found near at thermal head can see it if you remove the ink film.. then look at the LCD.. while triggering the lever,, see if there is reacting on screen while triggering the lever sensor.. if no reaction or sometimes there is reaction.. you need to cleaned the sensor at the digital board....