I wish leave a greeting for the phone but can't find it in the manual. I know it's not an answering system but it is capable of receiving messages; so it should have a way of leaving a greeting. Thank you.
Manual for your phone -http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1560om.pdf>
The messages are actually being left on the voicemail system provided by your telephone company, not on your phone. Please contact your telephone company for instructions on accessing and configuring their system.
SOURCE: "i have a uniden 6 0 dect2080 3 answering machine how to check the messages from a different phone"
The default security code is "80". If you have not reset that code, you will use 80.
This is all from the manual:
1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sounds a series of beeps.
2) During the greeting or the beeps (if answering system is off), press 0 (zero) and enter your security code within 2 seconds.
3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero" followed by a beep.
Then the manual lists all the remote commands. If you need those, you can go to uniden.com and download a manual.
SOURCE: Need to change greeting message and where could I get a manual
http://safemanuals.com/ if this helped wish i think it well pleasc let me know i could be of help.
SOURCE: My problem is the answering
Hello,
Here is the solution I gave to your other post of Aug. 31, 2009
Usually CallerId is a feature you pay for. Even if phone hardware can handle it your telco must activate the service. As to the answering machine not allowing you to leave messages, the problem can come from at least 2 things.
1.The code for remote access is incorrect (reconfigure or use the factory default.)
2.Memory is full:too many recorded messages.
3. Length (duration) of message is too short.
If you need a manual, here is a link.
http://www.uniden.com/index/manuals_results.cfm?cat=59
Select model and download manual.
Hope it helps.
SOURCE: Have lost manual for Uniden Elite 9035 answer
Hi,
You can download the manual from below adress and setting up/reseting of the answering message proceduer is given in Page 43.
http://www.uniden.com.au/RESOURCES_MAIN/pdfs/ELITE_9035_OM%20Final.pdf
thanx
548 views
Usually answered in minutes!
×