Power light blinks slowly The printer is out of paper in the middle of a print job. Load more paper. See "Loading paper" on page 20. Power light blinks rapidly There is a paper jam. Clear the paper jam.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A communication error has occurred between the outdoor and indoor units. Faulty wiring or a malfunctioning control unit may be responsible. Contact LG customer service for assistance. Their number is 1 800 243 0000.
Issue:
Alarm / Power light flashes orange 5 times consecutively (Print Head / Cartridge Error)
Solution:
Install the print head and ink tanks correctly iP4500 Reseat the Print Head and ink tanks iP4500
Follow these steps to reset the printer:
Turn the printer off with the Power button (if available).
Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) .
Unplug the printer's power cord for approximately 10
minutes, and then plug it back in. If troubleshooting a communication
issue, reconnect the data cable (not applicable to WiFi, Bluetooth or
Infrared).
You either have a hardware problem with your video card. ( may have pop out of socket when you plug in the monitor) or the cable is not allow communication to the monitor. As long as the amber light comes on you know you have power so focud on data cables and hardware.
if 4 blinks is consistent and even after unplugging tv still does not power on would recommend replacing small signal board as error is i2c communication failure which is specific to microprocessor located on small signal board
×