While movng the swilvle base broke off. modle # z50pt320-uc need a replacment.

There are 4 screws thru the back of the TV housing,. 3 screws thru taped holes in swivel and a large fasting the platform base, the swivel and the TV together

1 Related Answer

The Knight

76851 Answers
Posted on Dec 24, 2014

SOURCE: what board do I need to change on zenith plasma tv / z50pt320-uc it has odd bright colors and ghost image

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.

Testimonial: "I don't see anything on that site. so I surfed other site and I started with the z-sus board and that didn't do anything.. BUT now when I turn it on it has a white screen then it turns black and it shuts off the t.v all this happens within 30 sec. of turning on. This is a zenith PLASMA z50pt320-uc HDTV I'm guessing the main control board is bad? there is a little green light that is on that board that flashes 3 times then a pause then 1 flash a pause- dose that have any thing to do with my problem? any answers would be helpful. THANKS jeff"

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

How do i remove the Base?

Makita BO4900V Parts Breakdown

Beginning with pos 6 4 screws and remove pos 1 on top 3and4 both carbon brushes with holders . now you can split the armature with base from the motor housing .thats the only thing need for it.
so you can do the job . by replace the armature look for the bearing fits well in the housing again and replace the brush holders etcetera

Read full answer

Oct 28, 2015 • Makita BO4900V Half Sheet Finishing Sander

0helpful

1answer

What board do I need to change on zenith plasma tv / z50pt320-uc it has odd bright colors and ghost image

Read full answer

Dec 24, 2014 • Zenith Televison & Video

21helpful

3answers

How do I change the filter on Sunbeam Model SCM 2412 humidifier?

Turn the unit off and disconnect from the electrical
outlet.
2. Remove the tank from the housing.
3. Unlock the housing from the base by turning the lock
knob to the unlocked position.
4. Lift the housing straight up and place to the side.
5. Unlock the wick holder from the base by turning the lock
knob to the unlocked position.
6. Remove the wicks from the wick holder.
7. Follow the weekly cleaning instructions.
8. Insert new filters into the wick holder and lock the wick
holder back onto the base.
9. Replace the housing onto the base and lock it into place.
10. Fill the tank and place back into housing.
11. Repeat Operating Instructions.
It will take about 30 minutes for the humidifier to reach

Read full answer

Nov 03, 2010 • Sunbeam (0013871361) Humidifier

4helpful

1answer

What is the size of the 4 screws on the back of the lg 32ld350 tv?

Remove the 3 screws from the base, these screws are mostlikely metric M4/.70 pitch 3/4 inch long. these are the screws are the matching screens for the wall mount. You will have to buy 1 more. Also 1/8 mini fender washers maybe required to hold the bracket to the back of the TV due to the slots.
Hope this helps.

Read full answer

Jun 30, 2010 • Sharp LC52SB55U LCD TV

0helpful

1answer

Just a question as to how the base attaches to the tv?Don't have the unit, at a friends house and wants to know how to remove, looks like it attaches at the bottom, is this correct?

Most tvs have four to six screws that go in the back just above were the mount goes in at the bottom of the unit. look for a 8 to 10 inch raised area or 3 screws in a row, 2 rows. Face the tv face down on the bed with the base hanging over the edge. Some tv's like L.G.base just push into the bottom with 2 or 4 screws holding it in place. The screws will look much heavyer then the ones going around the set. maybe round top not flat topped

Read full answer

Nov 26, 2009 • Sansui HDLCDVD260 26 in. LCD Television

5helpful

2answers

The screws broke off when trying to remove the tv stand from my LG 42lg30. Is there any other way to remove the base stand? thanks

If you broke one of the base stand screw you will need to do as follow:

Remove the remaining screws of the stand and try to remove the stand, if you cant you will need to remove the back cover of the TV and then you will be able to remove the stand, remove the broken screw and put it all back.

It is pretty easy but if you feel you cant do it let me know and I can give you a detailed step by step guide.

Read full answer

May 26, 2009 • LG 42LG30 42 in. LCD HDTV

11helpful

3answers

Removing the base of flat panel tv

You don't have to mess around with the screws on the bottom of the base.

There are 4 screws on the back of the Toshiba that are in line with the wall mounting screw holes.

Remove the 4 screws and the base falls off.

Read full answer

Nov 23, 2008 • Toshiba Televison & Video

17helpful

6answers

Remove base of Insignia ns-ltdvd26-09

to remove base from insignia tv
1)remove plastic cover from bottom rear of tv
2)remove 8 philips head screws on rear of tv above base
3)pick up tv and base will come off

once you remove it you realize how easy it is

Read full answer

Jun 29, 2008 • Insignia LCDTV26 26 in. Television

7helpful

5answers

Olevia 227V lcd

All you need to do is remove the two long screws on the back of the tv panel just above the stand, then the two short back panel screws AND the three short screws just above the two panel screws and the stand will come right off. DO NOT remove any of the other screws in the perimeter of the back panel. There is no need.
After much trial and error this is the correct and EASY procedure for this apparently troublesome task. Good Luck !!

Read full answer

Feb 12, 2008 • Olevia LT27HVX 27 in. LCD Television

5helpful

3answers

How to Remove the Base

I have an Olevia 42" TV. I was able to remove the base by removing 16 screws on the back side. They were arranged vertically in 4 sets of 4. The screws go through the back panel, through the base and attach (without nuts) directly into the inside of the TV. After removing the 16 screws the stand simply slides out.
I tried removing two screws underneath the base area. They were small screws and were a pain to remove. I thought I would try that first instead of removing 16 screws but that did nothing.
Good luck!

Read full answer

Dec 10, 2007 • Olevia LT42HVi 42 in. LCD Television

Not finding what you are looking for?

View Most Popular

Z50PX2D 50 in. Plasma HDTV

Televison & Video

How do i remove the Base?

Makita BO4900V Half Sheet Finishing Sander

101 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Zenith Z50PX2D 50 in. Plasma HDTV? Or just drag it here!

Related Topics:

While movng the swilvle base broke off. modle # z50pt320-uc need a replacment.