Caterpillar a1143 wrist watch - Caterpillar (UB141344020) Wrist Watch

If it is a new movement you require, email
Me [email protected] and I will discuss options with you.
Would you need it fitting.
If so, prices would start from as little as £18 for a Minota Quartz right up to £175 for a brand new ETA automatic 2836/2 movement. This would include fitting.
I am based in the UK and have over 40 years experience

Problem with Wrist watch band.

please contact
[email protected]

Go to http://www.catwatches.com/en/distributors/IN/,.

Unfortunately when you type in "India" you will be directed to Switzerland, which implies they do not have any outlets in India.

Thank you for contacting FixYa.
I am not familiar with Cat watches, but here are instructions for basic watch backs:
Locate a very small tab (or recessed area) on the edge of the back cover. This is the access point for removal. You can find this sometimes by running your fingernail around the back rim, as this tab or indentation can be hard to see.

2Pull out the stem, which releases the back on some watches.

3Get a small flathead screwdriver it needs to be a thin inflexible tip. Use a kitchen knife as a last resort. Wrap the hand you are holding the watch with in a towel or protect your hand in some manner so you don't injure yourself if the screwdriver/knife slips.

4Very carefully slide the blade under the tiny metal protrusion on the back cover (or across the length of the recessed area, depending on which type of cover your watch has). Do not attempt to insert the point of the knife. Use the length of the blade.

5Get under the tab or recessed area and gently but firmly turn the blade upward, popping the cover off.

6When you replace the cover, make sure you line up the stem slot on the cover with the stem of the watch.

Link

Hi,

Please visit above link for your Fossil battery requirement. Kindly contact Customer Service Team for further details.

Thank you.

RECOMENDATION:
Seek professional help.
??
To find a registered repair person in your area.
GOTO:
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/

what make is your engine.