Instation of HP office JET 5610 all-in-one ink

Some printer software that detect ink levels won't recognize a cartridge that's been refilled. They treat the cartridge as empty although you've filled them with ink. You can try removing the HP software that pertains to the printing functions only (not the scanner abilities). You can also do a Power reset. Remove the printer cartridges, turn off the power, remove both the Power cord and USB cord (if applicable) for 10 minutes. After reconnecting the USB and power cords, install the cartridges as you normally would. The printer should treat them as new.

You'll find the instructions you need on page 75 (enter page 78 in the page box) of this document http://h10032.www1.hp.com/ctg/Manual/c00644922.pdf

Please open this LINK and follow the instructions on how to install the cartridges. And here's the supported cartridges details... Click HERE.


Let me know if you need further help..

Good Luck.

Thanks for using FixYa.

hi
you need to replace one or both of your cartridges with new ones
if you have the old you can check , what cartridge couse the error and you can refill the old one like this

If i help you pls vote

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....


http://www.hp.com/printer/prob676ijt65/solution

djiu9o11

show me a massage Cartridge error, refer to device documentation for troubleshoot printer model hp officejet 5610 all -in- one what is the problem and how do i solve thnk you

if you are to lift the top part of your printer you will see the cartridges inside as shown below:

Lifting the scanner bed exposes the entire paper path and gives your hands plenty of space to replace ink or clear paper jams.

I just had this problem too. Tricky little things, they are. I took a pair of pliers to the ink cartridge and was able to pull it out. I couldn't get it by holding the sides of it with the pliers, I did top and bottom. Also, it took a few tries but I bet you can get yours out too.

Are you sure you installed the ink cartridges correctly? They should snap in and then you should be able to do a Printer Test/Align cartridges function. 
Which error message is it putting out? 

Fiend your solution direct from hp. Here is your solution...


http://www.hp.com/printer/prob676ijt65/solution
347