Head unit not working denon dn 1800f

HI ALL YOU NEED TO DO IS PUT IN A CD/DVD LENS CLEANER CAUSE NOW ITS DIRTY THEREFORE THE LASER IS UNABLE TO READ THE DISC.

Sound like your Laser has gone. Part No. 9640005107

At $120-$130 for a replacement + P&P + fitting it's probably not viable.

try a cd-r writable disc,some cheep disc won't work with a high def recorder

either your controller has had it but my money is on the lead from the controller to the head unit!!

Hi,

You may try different USB cord.

Hope this helps.

Try this:
1. While holding "Title", Press Stop to enter what Denon calls "presetting" mode.
2. Press Track Search Reverse or Track Search Forward until you get to 20, which is the presetting mode for Single/Continuous Play.
3. Press Play to toggle between Continuous and Single Play.
4. Press Stop to exit Presetting Mode.
Hope this works! I just finished a belabored job without Single Play on this unit. I have been searching for the answer too. I don't have access to the deck to try it, but I think this will do the job.

http://www.denondj.com/Assets/Dimages/Products/Manuals/cd709d3d980d4f2d8013fea6e875c68d.pdf?ts=062556

Then the format can't be read by the MAC, what reason this is I have no idea.

contact denon and see what they say im sure they could help

Hi chrisdonna I recommend that you have atech look at your set to verify the problem.to repair should not cost that much maybe about $50.00 to $100.00,good luck.