Denon dn 1800 f problem

No it is only a player, not a burner.

Denon DN-T620 Operating Instructions Manual - ManualsLib

ManualsLib https://www.manualslib.com > ... > DN-T620

View and Download Denon DN-T620 operating instructions manual online. CD/cassette combi-deck. DN-T620 cassette player pdf manual download.

..

Hi, firstly check that the discs are not too scratched and be aware that CD's read and play from the inner diameter to the outer diameter. CD players are really finicky devices that can be affected by the slightest bump and also temperature and humidity changes. Sometimes decks have a humidity sensor embedded in the circuitry. So, all that being said, firstly just turn the set on and let it sit for a while to heat up and dry out especially if it hasn't been used for a while. Then, take the lid off and check for broken drive belts that actually spin the disc. (You may be able to hear the disc spin without the top off). After that the laser itself will have to be cleaned, adjusted and the current checked. Lasers do wear out and sometimes increasing the current to the laser will make it read for a little while longer. You will need the schematic diagram and some decent equipment and knowledge to achieve this though. Since they both don't work, and you got them for free, they might be good experimental pieces but, in my experience they are never 'time' worthwhile repairs. Good luck. Cheers

The lazer is not reading the disc, It is shot.

The way to force an eject, is to turn off the deck for a few minutes. Then when you turn it back on, continuously keep pressing the eject

Sound like your Laser has gone. Part No. 9640005107

At $120-$130 for a replacement + P&P + fitting it's probably not viable.

optical pick up on deck one has to be replaced to insure reliable operation.

Hi. this denon error code is signaling an issue that concerns the loading deck and optical lens assembly. in this case, the entire assembly will need to be replaced asap if possible

http://www.denondj.com/Assets/Dimages/Products/Manuals/cd709d3d980d4f2d8013fea6e875c68d.pdf?ts=062556

Please use the the deck's TAP button to tap in the corect BPM, then it will lock and stay steady. (this is mentioned in the manual) ;)

Hi chrisdonna I recommend that you have atech look at your set to verify the problem.to repair should not cost that much maybe about $50.00 to $100.00,good luck.