Routers Will a Linksys WRT54G2 wireless router operate ok with windows vista.

Hello Friend,

You can download the software from here

http://support.linksys.com/en-us/support/routers/WRT54G2

Linksys Wireless-G Broadband Router WRT54G2

here is a link for a review with lots of information and specs.

http://reviews.cnet.com/routers/linksys-wireless-g-broadband/4507-3319_7-32937120.html

What drivers do you want to download?
There are not drivers for Linksys router. It works on a software called as firmware?
How many wireless computers do you have?
What is the operating system on your laptop?
If your wireless network is secured then make sure that you have the correct network key.

See How to setup Linksys router
See how to connect to the wireless network

Setting up a homenetwork
Thisis the link to setup your wireless: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network

For Windows XP and Vista:

http://homedownloads.cisco.com/downloads/setupwizard/1224638318022/WRT54G2_USCAN.4.9.9020.0-ship-Stable.zip

For Mac:

http://homedownloads.cisco.com/downloads/setupwizard/1224638318015/SetupWizardMac_WRT54G2v1_4_1_.9.8113.1_US_CA.zip

Whats the problem? Isnt your laptop working now.

Please clarify so I can assit.

Thanks

You can download it from here,

http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G2

Select XP, Vista Setup wizard download.

Don't forget to give me a good rating as well as your vote.

You will need to check the wireless settings of the router .
Is there any computer connected to the router with the Ethernet cable?
If not then connect 1 computer to the router and open the router set up page. Once you open the router set up page, you will be able to find the wireless network key.
Use that password to connect to the wireless network

Click Here for step by step Instructions on how to find the network key

try going to the control panel then click add/remove programs. See if the software is listed there. If it is try uninstalling it. Reboot the computer. Then try installing the software again. What OS are you running. Windows XP or Vista?

Which operating system are you using.

If you are using Vista just right click on the network from the wireless list and then click on properties then on one of the tab you will see authentication type just choose the type you have setup in your router and click ok then it will be fine.

And if in windows xp go to the network finder area then click on Advanced Setup for wireless on the left hand side of that wireless browser then choose the wireless device from a list given and edit the password.