I Have a HoMedics Bpa 450wgn device and I wish to reset the memory function, i do not have the manual. Can You help please?

According to BPA-201 manual, pages 10 and 31, the "EP error" is a system error. The suggested action for this error, again according to the manual, is "measure again", as can be seen in the figure below:

The manual can be downloaded from:

http://www.homedics.com/media/documents/homedics/instructionbooks/BPA-201_IB.pdf

Hope you may find this answer helpful !

Regards,

Miguel L. Martins

Although the link below is for a BPA 200, it does show an AC adapter on page 9:

HoMedics BPA 200 User Manual Name function Of Each Part

If you use a Homedics BPA-110 automatic blood pressure monitor:
1 - Press the User-Select button to select User 1 or User 2.
2 - Press and hold the Date/Time Set buttons at the same time while in memory recall mode. The data for the selected user will be erased automatically.

Also, if you need a user manual, use this link to http://personalcare.manualsonline.com/ for personal care manuals.

For all other manuals, use the home page link http://www.manualsonline.com/.

Hope this helps.

No, unfortunately it's not. But you can obtain one by calling HoMedic's Customer Support at
1-800-466-3342. It can probably be emailed to you as an attachment.

Thanks for choosing FixYa.

Yes, it is. Go to Homedics website and find the support/download button. Then follow instructions.

1. Press the User-Select Button to select User 1 or User 2.

2. Press and hold the button that looks like it has a clock face on it and the + buttons at the same time, while in the Memory Recall Mode and the data for the selected user will be deleted automatically.

Hope this helps to answer your question. Please let me know.

1. Press the User-Select button to select User 1 or User 2.

2. Press and hold the button the that has a clock impression on it and the + button at the same tie while in the memory recall mode and the stored data for the selected user will be deleted automatically.

1st must install device drivers from a CD coming with your monitor. Then connect device to PC and if it has enough intelligence in its software it automatically will run a program on PC an retrieve data from device. Otherwise, after connecting device to PC, start the program on PC by clicking on its icon and follow instructions to save data on PC and display graphs etc...

This link take you to Homedics web site...to the right of the picture you will see "Support Information" click that tab to download a useer manual....I hope this helps.

http://www.homedics.com/products/health-diagnostics/therap-deluxe-automatic-blood-presssure-monitor.html#more-info

This link should help...click on "Support Information" to the right of the photo...I hope this is helpful.

http://www.homedics.com/products/therap-automatic-wrist-blood-pressure-monitor-with-60-memories.html