20 Most Recent Homedics PA-4H Programmable Percussion Massager with Heat Questions & Answers

The unit is not a toy and should not be used by children without adult supervision. Also, it is unsafe to use this product on adults and children while they sleep. You should NEVER use the massagers while you are asleep.

I don't have the Homedics programmable, but I have taken apart my Brookstone programmable (and lots of old Homedics massagers).

I'm going to guess the screws concealment method is similar. On the under side of the massager, look for small oval-shaped outlines that are the same color as the rest of the body. Mine had four. These are little plastic plugs that you can pry out with a tiny flat screwdriver or a razor blade. The screws are hidden under these plastic plugs.

I hope this helps

If it is set up for 110 volts, you should not use it on 220. Most likely you will burn the motor out in a matter of minutes.

thanks

If you have already tried replacing the batteries in your Homedics SC-531 body fat scale and are still unsuccessful, try the following: Voltage of the battery: Verify that the batteries are inserted correctly with respect to polarity. When you put the batteries in the compartment, make sure the marks on the inside match up with the positive and negative ends. Battery Reliability: Use new, high-quality batteries exclusively. It is possible for batteries to be low on charge or have a problem, even if they are brand new. Contacts for batteries: Be sure there is no debris or rust on the battery contacts located inside the battery compartment. Use rubbing alcohol and a cotton swab to clean the contacts if corrosion is visible. How to Reset: On the scale, you should see a button or other option to reset it. You can restart the system by pressing a little reset button that is located on some scales. For instructions on how to find and utilize this feature, consult the handbook that came with your particular model. Hold on a second. Do not attempt to power on the scale until one minute has passed after you have replaced the batteries. It may take a bit for some electronic gadgets to reset. Make sure nothing else is wrong. Check the scale for obvious signs of wear and tear, such as loose pieces or cracked surfaces. Get in touch with the manufacturer's customer service department if you run into any problems. Instruction Guide: See the instructions that come with the scale for further information. It might provide advice on how to fix common power problems or detailed directions for fixing specific problems. Get in touch with CS: Get in touch with Homedics's support staff if the troubleshooting instructions don't solve the issue. Depending on the problem you're experiencing, they might be able to provide you with more precise advice or suggestions. Always refer to the user manual for specific instructions on how to disassemble the scale before handling it, and be sure to follow any manufacturer-provided safety warnings. Contacting customer service is crucial if the scale is still within the warranty period.

Question edited for clarity.You have probably had it too long. Ask the manufacturer if there is a software update they can do on it?Or is it because you have more than 2 years of saved data?Stay informed about your coronary health with this automatic blood pressure monitor that stores up to 60 readings with date and time stamp for up to 2 users.https://www.google.com/search?q=homedics+bpa-200+maximum..

its not necessary for u

I have a homedics messenger. My turn on button is hard to find to trun on its very time consuming when you in pain. Can you help me with this issue. Sincerely Linnette Charles

The HoMedics digital scale SC-300 uses a CR2032 lithium coin cell battery. This battery has a diameter of 20mm and a thickness of 3.2mm, which makes it a small, flat battery that can easily fit into the scale.

The only place you are going to get parts is from the maker. They are not available anywhere else. The unit is also discontinued. https://www.google.com/search?q=Homedics+Mcs-1210H+parts

Parts and Accessories - HoMedics.com

https://www.homedics.com > parts-and-accessories If you have a humidifier or air purifier, you're going to need to replace parts and accessories on occasion. Choose the Homedics® parts that are right for ...

• Replacement Part for MCS-1210H - HoMedics.com

  https://www.homedics.com > ... > Discontinued Products This replacement part is compatible with the following HoMedics Easy Lounge Shiatsu Massaging Lounge Chair: MCS-1210H - Replacement Part.

Question edited for clarity. Question moved from Computers and Internet category. Batteries not fresh, or incorrectly inserted. This appears to be a device without a maker. Chinese 'sell and run'. https://www.google.com/search?q=uCrown2&rlz=1C1QJDB_enCA643CA644&sourceid=chrome&ie=UTF-8 ..

What is the model of your HoMedic Massager? If it has a rubber grip on the handle, you can take it off by simply sliding it towards the power cord, with effort and a little patience. Once the rubber grips are off, you will find 1 screw hidden under the grip, 1 screw near the power cord, and 5 screws on the head, take all the screws off. Once you've unscrewed all of the screws, unscrew the 2 vibrating heads then take the unit apart. Good luck.

Plug the power cord into a standard AC outlet. Turn the air purifier on. Press and hold the ionizer ION button for 3 seconds to reset the indicator.

From what i understand, they all make noise and nothing can be done for them. If I had it; it would be a different story. Good luck and sorry.