My samsung netbook PC goes to sleep every few minutes and need to be started again pressing the switch button on. Sometimes it comes to operation on its own ''as if some divine power has come into existence". I reinstalled the full window twice and the display driver many times from the recovery but nothing seems fruitful. Please guide me with your expert advice and help me retrieve life to my little lappi once again. thnx in advance!!

Depends on the model iPod nano but no off button only sleep! But either goes to sleep after a few minutes of inactivity! Press and hold play/pause for a few seconds to force sleep! If not being used slide hold on, to stop it coming on!

Sleep mode on a Windows 7 PC saves power without you having to turn your computer off and without losing any work. This option cuts the power to your monitor, powers down the hard drive and pauses all functions until you awaken the computer from hibernation. Whether you have a laptop, desktop or workstation, putting your computer into sleep mode will lower your electric bill and save money! Click the "Start" button in the lower left corner of your desktop. In the lower right corner of the Start menu, next to the "Shut Down" button, is a button labeled with a small, right-pointing arrow. Mouse over the arrow. The Shut Down menu appears. Point at "Sleep" and click on this option. Your Windows 7 computer goes into sleep mode. Wake your computer from sleep mode by jiggling the mouse. There may be a delay of a few seconds before your hardware powers on. All of your open programs are still open and your work is intact, just as you left it before the computer entered sleep mode. Configure your Windows 7 PC to go into sleep mode automatically when it is not used for a certain amount of time. Click "Start" and select "Control Panel." Click "System and Security." Click "Power Options." A menu opens. Click on "Choose when the computer sleeps" and select the number of minutes of inactivity. You can also set a separate time interval to put your monitor into sleep mode. If you set both to 10 minutes, then your PC and monitor will automatically go into sleep mode after 10 minutes of inactivity Your Computer in sleep mode b> First, save all of your work. Information in computer memory is not saved while your computer is on standby. From the Start menu, select Settings, then Control Panel, then Power Management. Click Standby Beside When I Push the Power Button. Push the Power button. b> Automatically Putting Your Computer on Standby b> Save all work before leaving your computer. From the Start menu, select Settings, then Control Panel. Double-click Power Management. Set the times that you want your system to go on standby, to shut off the monitor and to shut off the hard disks. Click OK. Your computer will go on standby according to the schedule you have entered. b> Putting Your Computer in Hibernation b> From the Start menu, select Settings, then Control Panel. Double-click Power Settings. Click on the Advanced tab. At the When I Push the Power Button On My Computer screen, click Hibernate. Click the Power button. Hope this helps.

HI

TAKE OUT THE BATTERY FROM YOUR LAPTOP ONCE AND CONNECT DIRECTLY TO POWER SUPPLY AFTER YOUR LAPTOP GETS ON YOU CAN PUT YOUR BATTERY AND THEN ONCE AGAIN SHUT DOWN YOUR LAPTOP PROPERLY AND SWITCH ON THE LAPTOP.

IF THEN ALSO YOU ARE NOT ABLE TO SWITCH ON YOU CAN CONTACT ME IN THIS E-MAIL [email protected]

REGARDS,
RAVI

Hi there! You could try go to Control Panel, open Power Options Properties, set the Power Buttons actions: When I close the lid of my portable computer: Stand by. Not Hebernate. Then go to Hibernate disable this function. Try this to see what happen. Hope this help. Thanks for reading

If you use Windows 7, u might have hybrid sleep activated. This is similar to hibernate. When u choose SLEEP, your computer goes to hibernate. Sometimes this hibernate just hangs. You have to reboot computer.
Try pressing the power button for several seconds (10-15). It should power off the laptop.
If not, unplug the charger and remove the battery for a few minutes. Then try to start it up again.

Sleep mode requires reconfiguration as obmission or adjustment to display at an extensive duration. Refer with devices user guide. Also available on the device help features

Frequently ACER ASPIRE ONE A110 and A150 hang and give a black screen of death. Most probably this is due to the BIOS problems and if you want to boot them again, a BIOS updating is required.
First, download the required BIOS from the Acer site:http://gd.panam.acer.com/home/ and unzip it by another computer. (Your netbook is already dead!)

Among the extracted files and folders, there is a folder namely Dos_Flash. Open it and there are four file items there like "3310, 3310.fd, FLASHIT, and readme.
Now rename 3310.fd as ZG5IA32.fd and FLASHIT as FLASHIT.EXE and keep the rest as they are.
Copy all these four files to a fully formated and blank USB stick. In this USB stick there should be no other files or folders than what you copied now ( 3310, ZG5IA32.fd, FLASHIT.EXE, readme )

Keeping this USB stick in hand go to the dead netbook. Switch off the device if it is already on. Insert the USB stick. Having the AC power and the battery connected to the device press and hold FN+Esc and simulatneously press the power button to turn on the netbook.
Release the FN and Esc buttons after a few seconds and now the power button will be blinking. In this stage press once the power button alone.
Now the device will start updating the BIOS, we can see the process as the LED of the USB stick flashes. In a few minutes-say less than 10 minutes-the system will restart and come to life again.
Don't disturb it during this process and wait until it comes to full level of operational condition to remove the USB stick.

Best of luck,
M K Pukayoor,
Malappuram Kerala India.

Check brightness key to adjust screen bright ness or may be your laptop is sleep mode. Press power button for few seconds and restart the PC

I managed to find a local repair man who fixed the problem. He put in a new transformer.

You probably have the "go to sleep" timeout set too low. Check out "Power Options" in the control panel.