Chicago Pneumatic Heavy Duty Zip Gun® Air Hammer - Answered Questions & Fixed issues
Im looking to buy a air hammer. what is the
It looks like Amazon came up with a name "zip gun hammer" A zip gun is a low profile gun with bullets. The cp716 is a good model. Make sure to get the bits with it. These air hammers do not come with bits most times.
good luck
Joe
2/19/2011 4:08:14 PM •
Chicago...
•
Answered
on Feb 19, 2011
•
220 views
Turns slow and no torque
Take some contact cleaner and spray it in the air intake couplin and then plug it into you air line and pull the trigger.be careful not to get sprayed in the face.do this a couple of times them do the same thing with tool oil . if it is dirty most of the time this will solve the trouble.
9/14/2016 2:26:26 AM •
Chicago...
•
Answered
on Sep 14, 2016
•
515 views
How do I remove pneumatic staples from furniture.
try a large pair of pliers.
straighten the staples as much as you can, grip one leg with the pliers about 1/8" from the wood, and tap the pliers with a mallet or wood block.
alternate "till you can grip the crown.
1/22/2015 10:54:57 AM •
Chicago...
•
Answered
on Jan 22, 2015
•
131 views
Working temprature of compressure is increasing in short time and comoressure get stopped.
It is normal for the air to heat up as pressure increases. The temp can easily increase to 200 degrees depending on pressure. Most likely problem causing your motor to stop is the capacitor (should test to within 10 percent of rating) or using too long /thin extension cord. If capacitor is good and low power is not problem, then make sure that the check valve (non-return valve) is not leaking pressure back to the pump causing motor to overload. Good luck
3/24/2014 8:48:53 PM •
Chicago...
•
Answered
on Mar 24, 2014
•
92 views
Oil leak through air in let
replace the gaskets or O-rings. and try again. Normally the manufacature sell a kit for to repair a leakage.God bless you
11/7/2013 12:32:29 PM •
Chicago...
•
Answered
on Nov 07, 2013
•
47 views
Not finding what you are looking for?