20 Most Recent Gateway GT5692 Desktop Computer - Page 9 Questions & Answers

There is an easy way, and there is a hard way. The easy way requires you to get access to her computer and download Everest Home Edition. After installing the application open it up and find out if you're currently using SDRAM, DDR, DDR2, or something else. You will have to match the memory in order for it to work together.

Now for the hard way. You will need to find a way to open the computer to take a peek inside. Pop out the memory stick(s) by opening the pins holding the memory shown in this picture. Afterward look at the bottom of the memory stick(s). You're looking for the noticeable difference between DDR and SDR as depicted here.

Once again, you will need to match the memory types to ensure that they will work together. Also, please don't insert an odd (3, 5, 7, etc...) number of memory sticks (1 stick being the exception), some motherboards can't handle it.

Let us know what you find out. All the best in helping out ***********-in-Law!

just need to go to a computer store and buy a replacement if you have never done this or taken the case off might want to have it installed. But if your handy with that type of stuff its not hard to change

check both for malware

Contact Verizon they can help you with this.

It does not, but it does have wifi.

I thought gateway was out of business. How old is your computer? W10 may be taxing the chip too much.

Any USB drive can connect to the laptop.. what exactly are you trying to do? Please click the Comment link to respond.

Customized Mink Eyelashes Customized Mink Eyelashes Manufacturer-KENZO LASHES Factory wholesale private label Customized Mink Eyelashes 100% Free Sample Available Luxury Customized Mink Eyelashes.Get inspired by our Exclusive Free Sample Available Luxury Customized Mink Eyelashes. Free Sample Available Luxury Customized Mink Eyelashes for day or night glam.Worldwide Free shipping on orders. http://www.kenzolashes.com/customized-mink-eyelashes

Hi, You plug the wireless transceiver (small usb dongle) into the pc and it will auto connect to the keyboard as long as the keyboard has working batteries installed and is switched on (if it has a power button)

This is the problem and a few solutions: https://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/

I think you need only plug the modem into the router, then plug other devices into the router, or hook up through wifi.. If you want to reply, please click the Comment link.

Shop Lashes Shop it is right ?

Click the Comment link and tell us the model number of the Gateway mini computer.

is the fan full of dust??

They may be limiting your bandwidth. I think it's called throttling back.. you might call them and ask about the problem.

contact the administration of the patient gateway system direct on the phone and have them talk you through the problem I suspect that it could be as simple as not including gender or address( MR,MRS, etc)so the computer cannot distinguish that there is a different application

Your Gateway either has corrupt drivers or has forgotten your WiFi. Go into your device manager and remove the WiFi device. Then have your computer search for any hardware changes. It will find your wifi device and reload drivers. If this does not work, you have a bad wifi card. Semper Fi, Z

use an external USB wireless adapter

Try this: Start the computer. As soon as the "Starting Windows" screen comes up (not the Gateway/eMachines screen), hold down the Power Button to shut off the computer. This might force the computer to go in to Windows recovery mode when you restart. Now, turn on the computer, and it should go to a "Windows Diagnostics and Recovery" page. Choose Diagnose the Problem or whatever it says, follow the instructions. Good luck.

There is no specific slot for the C disk, the C disk is your primary disk where you put your OS installtion, if you have a second disk the name of that one will be D.