20 Most Recent Gateway FPD1975W 19" LCD Monitor Questions & Answers


dont know how old monitor is but it may be time for an upgrade OR the pc/laptop/desktop? may need some setting changes for your wake time, sleep time, intervals, etc.? Sometimes if laptop,, you have to tap the power button to wake up after extended sleep times.

Gateway FPD1975W... | Answered on Feb 08, 2019


You need to install EZTUNE from Gateway, but you need to go here first:
Portrait Displays' Theft Deterrence minimizes theft or unauthorized relocation of your display. Theft Deterrence does not prevent the display from being stolen, but hinders the operation of the display once it is removed from the 'Theft Deterrence enabled' host computer.

This site is provided for you to securely store your PIN in the event you should need to retrieve it at some point in the future.

Please select from the following options.

Change your PIN. https://pinreg.portrait.com/change_p...=dtune&OEM=gwy

Forgot your PIN? https://pinreg.portrait.com/remind_p...=dtune&OEM=gwy


User manual:
http://www.retrevo.com/support/Gateway-FPD1975W-Monitors-manual/id/1071ag416/t/2/

Gateway FPD1975W... | Answered on Jan 22, 2019


First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then your video card in your machine is bad. If still bad then the monitor has lost it's signal input. This will have to be repaired by a pro. I repair these all the time and it's not as expensive as you might think.

Gateway FPD1975W... | Answered on Mar 30, 2016


Sounds like your menu button on the monitor is stuck in the pushed in position. See if that is the problem and use a needle, q-tip with alcohol to pop it back out.

Gateway FPD1975W... | Answered on Apr 29, 2015


Which model 900w or LE1936 ?
This info is usually on a sticker to the side of the stand.
If the 900w: You problem is probably that the capacitors on the power board have gone bad and need replacing. May also have transistor problems.
You would have to open it up to get a better idea.
I can probably tell from a picture.
If it is the LE1936: then it could be a similar capacitor problem, but it is rarer on this model than the 900w
Also on this model, there is a voltage regulator on the vga-dvi board that tends to go bad.
email [email protected]

Gateway FPD1975W... | Answered on Mar 07, 2015


I had that problem, after awhile of using mine, the words would appear to be streaking. I bought a new monitor.

Gateway FPD1975W... | Answered on Sep 20, 2014


It was damaged by the water.

Gateway FPD1975W... | Answered on Jul 28, 2014


107/3.14159 = 34.06 (rounded)

Gateway FPD1975W... | Answered on Jul 19, 2014


check connections, then separate wiring. touching wires create cross-talk of signals.

Gateway FPD1975W... | Answered on Jun 22, 2014


separate the wiring. touching wires creates cross-talk of signals.

Gateway FPD1975W... | Answered on Jun 22, 2014

Not finding what you are looking for?
Gateway FPD1975W 19" LCD Monitor Logo

382 questions posted

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Gateway Computers & Internet

  • Gateway Computers & Internet

Most Popular Question

power switch blinking turn

  • Computers & Internet
Loading...