20 Most Recent Hitachi CP-X201 Projector - Page 5 Questions & Answers

Please tell us the make and model of your laptop, and the make and model of the projector so we can advise you on how to connect them to each other.

1,Check the fans ,whether the fan is running, We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

the lcd panels were broken, the new one cost USD200 We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

Many LED TVs and other electronics have bad capacitors on their power supply boards. You can visually inspect them by opening the TV and looking for capacitors with bulging tops. If you see any, replace them all in the power board section. This should fix the problem. Check to see if your TV is still under warranty first though.

Is it a DLP or LCD projector? Check your manual or provide the exact model number. Thank you. -GWOOD

This usually means there's a loose physical connection somewhere. Check all the cables attached to the outside of the projector. For example, any HDMI cables, USB cables, Computer Monitor cable, etc. -GWOOD

Hiya there, just worked out how to reset the filter timer so for those that need to know here's the solution;
Bring up the menu and go right the way down to "Option" where it shows you the lamp and filter hours.
Next highlight/select the filter timer section and while its on there hold the RESET button on the remote for 5 seconds.. this then pops up with a resert option and hey, 0h again, good as new! :-)
Oh and if you dont have a remote, just hold the right arrow button instead for 5 seconds in place of the reset and follow instructions as above!
Hope this helps.
Regards,
Omar.

Here is a link to a forun that explains whats happening. http://www.avsforum.com/t/1441789/black-and-white-dots-all-over-my-projector-screen-what-causes-it

We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry,Lampdeng Limited

Youc an use the monitor output of the PC to be connected than the USB and it will work even without any software installed.
so check this out and respond