Euro-Pro EP416W - Answered Questions & Fixed issues
I'm looking for the service Manual for an Omega Euro-Pro Serger. Model number 434D.
You can try contacting Euro-Pro directly to see if they have a service manual available for the Omega Euro-Pro Serger model 434D. Alternatively, you can try searching for the manual online through a search engine or online manual database. There are also online forums and communities dedicated to sewing and serging that may have resources or advice on how to troubleshoot or repair your machine.
Euro-pro 9130c. Sewing not moving forward. Stitching in one spot. How do I correct so fabric and stitching moving?
The feed dogs might be lowered, or the stitch length might be set to zero, or the presser foot tension might be very light.byCheck the feed dog lever first.It is at the back near the free arm. If it is ok, test the feed dogs by setting the stitch length to maximum on straight stitch, then, with the presser foot raised and no material or top thread in the machine rotate the hand wheel towards you and watch the feed dogs. They should move up, then towards you then down then back in cycles. If they don't move, and the feed dogs are not lowered, something is broken https://www.manualslib.com/manual/939695/Euro-Pro-9130c.html?page=6#manual
Not finding what you are looking for?
but if you want a original spool pin here are 2 links to check and see if they can help you
http://www.sewingpartsonline.com/
ultimatesewingandvac com
