Top 20
Motorola Mobility Bluetooth Headset-Silver/Black Headset - Page 2 Questions & Answers
Pairing h700 to computer
1. You need to press the call button while the boom is closed to get the head set to turn purple
2. Open the boom (reciever) to keep the pairing light on.
3. turn on your bluetooth on your computer and connect to it.
*** typically the password is 0000
2/18/2009 7:03:47 PM •
Motorola...
•
152 views • 0 helpful votes
Audio on h700c
Hi,
Check to see if you have not muted the headset or the phone.
11/5/2008 12:25:24 AM •
Motorola...
•
285 views • 0 helpful votes
PASSCODE
hi have motorola h700 bluetooth device but i forget my passcode how do i reset it again i tried many passcode like 0000, 1234, 1111 ,2222, 3333,4444,5555,6666,7777,8888,9999, but its not connecting wat do i do nw.. plz solve my problem.... my email address is
[email protected]
8/21/2008 10:56:34 AM •
Motorola...
•
1,106 views • 6 helpful votes
Audio Problems!
You have the mute function turned on. See the book that came with it.
9/8/2008 5:12:46 PM •
Motorola...
•
331 views • 1 helpful votes
How do I connect my H700C?
usually it's pretty simple, you have to turn the h700c on, usually it's by holding the button for few second untill you get the blue light on permanent for a few seconds, now go to your phone and look for the blutooth settings, now you should have an option find other devices. after your phone found the headset you'll have an option "connect" or "pair" or somthing from that kind.
And that's it
Hope this helps
don't forget to rate
All the best
Tom
4/10/2008 2:56:56 PM •
Motorola...
•
4,190 views • 4 helpful votes
Motorola h700c
Hold the mutifunction button with the mouth piece close, until it turn purple, then open the mouth piece so that it will stay in the pairing mode. Now go ahead and have your phone or blackberry search for H700c
Good luck
12/13/2007 2:39:34 PM •
Motorola...
•
16,522 views • 61 helpful votes
Motorola H700 Bluetooth connection problem
1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H700 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".
Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".
please give good rating if the solution works.
Thanks for using FixYa.
4/1/2008 2:49:31 PM •
Motorola...
•
470 views • 3 helpful votes
Passkey for H700c
The passcode for bluetooth headsets is 0000. Its a default setting.
1/4/2008 3:53:56 AM •
Motorola...
•
2,005 views • 20 helpful votes
Motorola h700c
Have you tried a soft reset of the unit?
Try uninstall and install again the devices/
3/16/2008 1:42:20 PM •
Motorola...
•
211 views • 0 helpful votes
H700C Low audi volume
The head set just started to have low audio. People can hear
what I am saying. I can't hear them.
How do I fix it?
2/8/2008 2:38:31 PM •
Motorola...
•
569 views • 0 helpful votes
Motorola H700C Pairing with LG VX8700
im having a problem with my h700c and my lg too it was paired with a samsung and i got the lg now the phone phone the BT fine it just wont pair,wat can it be?
1/11/2008 1:49:23 PM •
Motorola...
•
1,239 views • 0 helpful votes
How to wire a fridge thermostat
Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:
- Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
- Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
- Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
- Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.
4/19/2024 6:14:37 AM •
Radio...
•
15 views • 0 helpful votes
Not finding what you are looking for?