Dual XDVD8181 Car Video Player - Page 5 - Answered Questions & Fixed issues

how can i bypass my dvd player lockout while driving.

all you have to do for you to be able to play video while driving is... take the yellow wire with blue strip and wrap it with your ground wire and connect the ground wire to a GOOD chasie ground

1 Ground the emergency brake wire,i use the radios black wire to ground it.

2 Insert an original DVD and let it play until you hear the sound.Copied DVDs will not work for this.

3 Press the STOP button TWICE with the remote.

4 Using the remote enter 26604 and press enter.If done correctly you should hear it beep and the video will be viewable.

http://newjersey.craigslist.org/emd/1065630948.html

who installed it, did you doit lol. get a professional, i did and it works great, he installed a toggle switch in mine.....

you have to toggle swicth the ground, make it think the brake is on

go to fm radio screen and touch the EQ spot

go to fm then touch E

just grounded it.

A tiny pin size button just below the "Mode" and "Next Track '>>I' " button.

the fuse is in the black box tied in to the main power wire,the yellow one. open it up and the fuse is inside. if this has been cut off and your other fuses are fine, the unit did not have proper protection and probably fried from a surge or short cicuit . the fuse on the unit should be a 10 amp mini and no higher.

on the back of the unit you will see a yellow/blue wire probably has a tag that says parking brake(-) tie that wire in with your main ground wire- black wire. no more video block. so i dont get in trouble remember that in most states it is illegal to watch videos while driving so dont watch them while driving this is only used as a reference only and do this at your own risk.

hi there,

the unit wil come with instructions in diffrent laungues.

When you burn the c.d. make sure the burner has it on the correct settings. The "blank" c.d.s you are playing will play on a computer but nothing else. If you change the recording settings so that it isn't for cpu only you will be good to go!

Michael

I took the unit apart and found there was a little plastic piece that broke off. The piece held a spring in place that aligned the bottom disk tray.  Does the unit scratch your cd when it spits it out?

For the Anti-Theft Passcode if you forgot yours - Turn to player on. Make sure the screen is out. Press and HOLD the MUTE button. While holding the MUTE button, press and HOLD the POWER button. (Should be holding them both down at this time.) After about 12 seconds a new passcode screen should come up. Release the MUTE and POWER buttons. Type in 122164. Press OK. Your passcode is now reset to 0000.

For The E Brake Passcode - Put in a DVD. Wait until you hear the sounds of the DVD. Press STOP twice on your remote. Press 22604 on the remote. Press OK/ENTER on the remote.

Possibly a "logic lock" issue. Try unplugging the unit WHILE it's powered up. Wait a few, then plug back in and try agin. Let me know.

If sme problem, you can "try" a laser lens cleaner but I never had any luck with those. By my guess the unit is around 2 years old?

Oh, and make sure the discs are clean.....duh :-)
Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Unfortunately the Duals on't work like the Jensens do. I know of only one way. Get it to bypass with a toggle switch and go through the sequence to get it to come on. You may want to wire it hot all the time so you don't have to do switch flipping every time. Trust me it's a pain in the booty. Once bypassed, since the deck is on all the time, you manuall shut it off thus retaining the bypass.

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

try 0000

http://www.fixya.com/support/t661664-dual_xdvd710_cd_ejecting
http://www.fixya.com/support/t892341-cd_wont_stay_in

More of the same w/ pics