20 Most Recent
Kenwood KDC-135 CD Player - Page 6 Questions & Answers
KDC 3008 display unit faded
if the screen went black, it means your lcd lights wnet bad, there is no light power button on those, they automaticaly work....
Unit on standby
Hello Tim-----your radio has menu options that can be changed- one of these turns on your aux port. to access this GO TO
www.kenwoodusa.com on the top of the page click on support then on the left side of the page click on user manuals now on the right side of the page type in k and then scroll down until you get to your model (kdc135) -----on pages 12-13 you will see the instructions to turn on the auxilary mode. If you have any problem drop me an E-Mail at
[email protected]
Good luck
Merle
Hey jeff about the kenwood
In standby you have to hold menu doen untill menu appears on screen, Scroll to aux and turn it on :)
Don
DCER error
Every 1 of those i have gotten in service here the amp chip #KKZ10 REF# ic5
Kenwood KDC-119 car stereo problem
There is a small hole at the bottom of the stereo face that will reset the system. I pushed a pen tip into the hole and it turned the stereo off. When I removed the pen, the system turned on and the CD ejected. Problem solved.
My car stereo
In standby hold the menu button down untill menu pops up, the use the up down left right and pushing of the joystick to select clock ans set it :)
HIGH PITCH SOUND
sounds like a ground issue, or a problem with the deck, id take it back to where u had it installed
Mp3 imput
Make shure unit is in standby, Press menu till meny appears on screen scroll to aux and turn it on
Don
KCD-135
Make shure unit is in standby, Press menu till meny appears on screen scroll to aux and turn it on
Don
Kdc-135
Make shure unit is in standby, Press menu till meny appears on screen scroll to aux and turn it on
Don
My mp3 player doesnt work
Make shure unit is in standby, Press menu till meny appears on screen scroll to aux and turn it on
Don
Not finding what you are looking for?